News Flash - The Landscape of SIL, Cat, & PL Changed Last Week - Comment: Breathing Room


Last week while I was writing my blog on this subject the European Union (EU) met and decided to extend EN 954-1; 1996 for up to three more years or 2012. This was announced internally in the United States to those of us who participate in standards writing on committees. EN 954-1 was scheduled to expire in October of 2009 and this importance drove last week’s blog. It seems that what motivated the EU to adopt this extension is the realization that hundreds of European products and many end users still base their safety conformance on EN 954-1 requirements including the Category hazards (B, 1, 2, 3, & 4).

Is it possible that some of the issues I spelled out last week here in the US are also evident in Europe? Is it possible that the new requirements of ISO 13849-1; 2006 are too demanding for medium and small sized companies? Is it possible that these companies realize that the higher level skill sets required for implementing these new requirements are outside their reach? Is it possible that these companies simply can’t afford to comply?

This is a major issue for global industry to address and fortunately it appears that we now have three more years to find some resolution to the many issues. At a minimum, in the coming weeks and months I predict a tsunami of provocative articles, whitepapers, and more!

Let’s hear where you sit on the issue?

Posted by J.B. Titus on September 17, 2009


September 22, 2009

In response to: News Flash - The Landscape of SIL, Cat, & PL Changed Last WeekDan G commented:

We are a relatively small OEM manufacturer that delivers to the US, EU, and Rest Of the World. We have tried to expend the resources required to comply with 13849-1, but the challenges are great, especially in trying to source components other than logic solvers that have perfomance level certification. This extra breathing room is quite welcome!

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.