New sensor networks will measure business variables, not the process.

Emerson Process Management reckons a move to “pervasive sensing” will more than double the existing $16 billion measurement market by helping production facilities enhance site safety, reliability, energy efficiency, and more.

10/04/2013


Emerson Process Management has introduced an expanded product portfolio to address what it sees as an untapped market for intelligent sensors in process manufacturing and production operations. This expanded market, which it has dubbed “pervasive sensing,” extends the company’s focus beyond traditional process control and safety systems to address customers’ need for improved visibility to conditions outside of process control. Emerson estimates that over the next 10 years this additional served market will more than double the $16 billion traditional measurement market. 

The company contends that deploying this pervasive sensing can help enhance site safety, security, equipment reliability, and energy efficiency in industries such as oil and gas production, refining, chemical, power, and mining, where installing additional sensors to monitor non-process parameters has traditionally been physically difficult, expensive, or technically challenging. This is counter to the historical approach where the risks associated with equipment degradation or failure  were dealt with by periodic manual inspections and reactive maintenance, or energy losses were simply unidentified and allowed to continue unabated.

With the advent of wireless technologies and advances in sensor technology and installation techniques, Emerson has overcome the cost/value barrier by providing lower cost of deployment, reliable non-intrusive installation, and low lifecycle costs, combined with a high degree of ease-of-use in sensor applications. New software applications and embedded sensor intelligence is also becoming available to interpret the data from these sensors and convert it into actionable information, enabling prompt response to potential problems and better insight for improved decision-making.

“Our customers are like anyone else—they want actionable information that can make their lives safer, more predictable, and save them cost, risk, and time,” said Peter Zornio, chief strategic officer at Emerson Process Management. “This goes beyond the control room and optimizing process performance. They want clarity and certainty of conditions for business-critical decision-making across all aspects of their operations. To achieve this, a more comprehensive network of sensors is needed. Pervasive sensing provides the foundation for their insight.”

Zornio adds, “A great analogy we are all familiar with is the ongoing evolution of automobile sensors. They have evolved from managing engine performance and simple ‘check engine’ alerts to providing actionable information about all aspects of car performance, such as precise tire pressure and fuel economy, to help maintain safety, economy, and provide failure prevention diagnostics.”

Emerson says it is already seeing customers move aggressively to take advantage of pervasive sensing. It cites an Eastern European oil processing plant that is currently deploying a full wireless infrastructure to allow the addition of 12,000 instruments following a pervasive sensing scheme. This represents 60% beyond the base of traditional process measurements in an effort to improve detection of energy losses, equipment corrosion, and safety releases.  

“The pervasive sensing opportunity grew out of Emerson listening to our customers and better understanding their needs,” said Steve Sonnenberg, president, Emerson Process Management. “While the industry has widespread adoption of process-related automation, the opportunities for utilizing technologies that make a profound, measureable business impact outside of the process have been elusive. Not anymore. The combination of pervasive sensing with software and algorithms for interpretation and decision-making is empowering customers with actionable insights in places they never dreamed.”

Examples of Emerson Process Management products that address the pervasive sensing market include ultrasonic and point sensors in the recently acquired NetSafety and Groveley product lines, corrosion and erosion detection technology from the Roxar acquisition, vibration sensing of rotating equipment from CSI, and the Rosemount wireless steam trap monitor and wireless bolt-on surface temperature probe.

Emerson Process Management

www.emersonprocess.com



Anonymous , 11/01/13 05:29 AM:

WirelessHART enables existing plants to be modernized with a “second layer” of automation, beyond the primary layer of wired automation of the control and monitoring functions on the P&ID. Pervasive sensing using WirelessHART monitors the “missing measurements” that are “beyond the P&ID”. These are primarily essential asset monitoring for increased equipment reliability and availability; equipment “Time on Pipe”, HS&E monitoring for improved safety and compliance, as well as energy conservation measures (ECM) for improved energy efficiency. A formal process for this modernization from audit, design, commissioning, and handover has been developed. Most of these measurements go to the asset management system, not to the control system or logic solver. The new data is used by maintenance, reliability, and energy personnel that didn’t get real-time data in the past.

Modernization using WirelessHART is a huge business opportunity for the entire industry. For instance, EPCs can go back to all the plants they have built the past thirty years or more and offer a modernization by deploying this second layer of pervasive sensing of missing measurements beyond the P&ID.

Learn more here:
http://community.emerson.com/process/emerson-exchange/b/weblog/archive/2013/10/03/why-are-there-missing-measurements.aspx

Jonas Berge
Jonas , , 11/09/13 02:57 AM:

I personally agree. We can't rely on sensors with 4-20 mA and on/off output individually hardwired. For example, cars have 2X-3X more sensors today than only a few years ago. How do they do it? They have on-board digital networks, not just one, but many for drive train and breaks, for climate and comforts, and for information and entertainment. They also use wireless for some sensors. The same goes for combine harvesters and airplanes.

WirelessHART enables existing plants to be modernized with a “second layer” of automation, beyond the primary layer of wired automation of the control and monitoring functions on the P&ID. Pervasive sensing using WirelessHART monitors the “missing measurements” that are “beyond the P&ID”. These are primarily essential asset monitoring for increased equipment reliability and availability; equipment “Time on Pipe”, HS&E monitoring for improved safety and compliance, as well as energy conservation measures (ECM) for improved energy efficiency. A formal process for this modernization from audit, design, commissioning, and handover has been developed. Most of these measurements go to the asset management system, not to the control system or logic solver. The new data is used by maintenance, reliability, and energy personnel that didn’t get real-time data in the past.

Modernization using WirelessHART is a huge business opportunity for the entire industry. For instance, EPCs can go back to all the plants they have built the past thirty years or more and offer a modernization by deploying this second layer of pervasive sensing of missing measurements beyond the P&ID.

Modern plants should be no different from modern cars. We need digital networking from the “first meter”; FOUNDATION fieldbus and WirelessHART for the sensors and actuators.

Learn more here:
http://community.emerson.com/process/emerson-exchange/b/weblog/archive/2013/10/03/why-are-there-missing-measurements.aspx

I’m Jonas Berge, and I approve this message
Jonas , , 11/09/13 03:00 AM:

I personally agree. We can't rely on sensors with 4-20 mA and on/off output individually hardwired. For example, cars have 2X-3X more sensors today than only a few years ago. How do they do it? They have on-board digital networks, not just one, but many for drive train and breaks, for climate and comforts, and for information and entertainment. They also use wireless for some sensors. The same goes for combine harvesters and airplanes.

WirelessHART enables existing plants to be modernized with a “second layer” of automation, beyond the primary layer of wired automation of the control and monitoring functions on the P&ID. Pervasive sensing using WirelessHART monitors the “missing measurements” that are “beyond the P&ID”. These are primarily essential asset monitoring for increased equipment reliability and availability; equipment “Time on Pipe”, HS&E monitoring for improved safety and compliance, as well as energy conservation measures (ECM) for improved energy efficiency. A formal process for this modernization from audit, design, commissioning, and handover has been developed. Most of these measurements go to the asset management system, not to the control system or logic solver. The new data is used by maintenance, reliability, and energy personnel that didn’t get real-time data in the past.

Modernization using WirelessHART is a huge business opportunity for the entire industry. For instance, EPCs can go back to all the plants they have built the past thirty years or more and offer a modernization by deploying this second layer of pervasive sensing of missing measurements beyond the P&ID.

Modern plants should be no different from modern cars. We need digital networking from the “first meter”; FOUNDATION fieldbus and WirelessHART for the sensors and actuators.

Learn more here:
http://community.emerson.com/process/emerson-exchange/b/weblog/archive/2013/10/03/why-are-there-missing-measurements.aspx
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me