New research: Wireless operator interface terminals sought

According to new research, the interface features that end users and machine builders are willing to spend money on are wireless capabilities, touchscreens and network-enabled operator interface terminals. Useful resources, with links, are provided. 

07/10/2008


When it comes to operator interface terminals, once you decide a model is tough enough for your industrial application, what else do you look for? According to respondents to Control Engineering ’s July 2008 Product Research survey, the most likely features that end users and machine builders are willing to spend money on are wireless capabilities, touchscreens and network-enabled units. In addition to trend data, this research and other resources can help you decide what features, NEMA ratings and communications technologies you should be looking for, as well as which vendors are offering appropriate products.

The Operator Interface Product Research article contains new research results and compares it to 2006 data to reveal trends. For example, only 37% of this year’s respondents say they have color displays, but 73% say they want them. Forty percent have touchscreens today, but 67% want them. This year’s results show similar trends to 2006 results, including a preference for flat-panel displays away from CRTs, and increasing interesting in wireless and open-network technologies.

In the next five years, respondents say they anticipate spending more than they have previously on terminals to gain wireless capabilities, touchscreens and network-enabled units. Sixty-eight percent expect to spend more on wireless terminals, while only 53% plan to spend more to obtain color displays.

And while new features are nice, users look first for proven ruggedness. Said one respondent, “Environmental concerns are considered first—such as resistance to vibration, heat, cold, water—then the programming environment, size, [and] color. It has to hold up physically in the location in which you are going to use it, or everything else is moot.”

Monthly research reports are made available online in the Control Engineering Resource Center. Viewing the printed article online through the www.controleng.com/archives provides access to a list of products and links to the top 21 vendors of operator interface terminals for industrial environments.

One vendor, QSI Corp., introduced its QTERM-G58 operator interface terminal—a wireless, battery-powered version of its QTERM-G55. The handheld computer has a 3.5-in. color sunlight readable display and rugged design for harsh conditions. QSI also provides additional information in the form of free whitepapers that explain operator interface technologies. One whitepaper discusses issues to con

For other information on rugged interfaces, particularly in the form of industrial computers, see “ Solid HMI connections, sealed edges prove tough enough ,” also in the July 2008 issue of Control Engineering .

— Edited by Renee Robbins , senior editor
Control Engineering Information Control eNewsletter
Register here and scroll down to select your choice of eNewsletters free .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me