New patent addresses maglev stability
MagneMotion Inc., a developer and manufacturer of linear synchronous motor (LSM) products and systems used in assembly automation, material handling and transportation applications, has been awarded U.S. Patent No. 7,448,327 related to magnetic levitation (Maglev) systems. The patent builds on previously issued Patent No.
MagneMotion Inc., a developer and manufacturer of linear synchronous motor (LSM) products and systems used in assembly automation, material handling and transportation applications, has been awarded U.S. Patent No. 7,448,327 related to magnetic levitation (Maglev) systems. The patent builds on previously issued Patent No. 6,983,701, which recognizes the company’s use of a single magnetic structure to provide suspension, guidance and propulsion of vehicles on a guideway, eliminating a level of complexity and costs found in other maglev systems.
The company says its new patent expands on the initial patent in two primary ways. First, the magnets in the single magnetic structure are offset, thereby providing lateral stability; and second, control coils are wrapped around the offset magnets to stabilize and maintain the magnetic gap when the vehicle is levitated. When combined, the inventions are said to improve ride quality, reduce the cost of the vehicle and guideway, and simplify the control system. In applications where small vehicles can be deployed, the new invention may eliminate the need for a secondary suspension to provide lateral damping, which, the company says, would add weight and cost to the vehicle, and would likely increase vehicle height and raise its center of gravity.
The company plans to use technology addressed in both patents on its current maglev development project, which is a cooperative effort with the Federal Transit Administration (FTA) and Old Dominion University (ODU). During Phase I of the project, the company plans to build and test a 160-ft track at its corporate headquarters in Devens, MA. During Phase II, it plans to build a 500-ft track on an existing maglev guideway structure at Old Dominion University in Norfolk, VA. The company’s design envisions Maglev vehicles that are the size of a van or small bus that can accelerate quickly to a target speed of about 100 mph (161 km/h). The test system will operate at a lower speed, as the guideway at ODU is designed for a maximum speed of 40 mph. The company says that despite incorporating smaller-sized vehicles, by having numerous vehicles in operation simultaneously and under constant, accurate control, the system could accommodate as large a ridership as other designs.
The company schedule calls for its maglev test system to become operational in summer 2009. The test system will not be designed to carry passengers.
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.