New, efficient industrial gas turbines coming

Technology advances in industry often proceed at a slow, conservative pace. This applies more so to large, complex systems like the new-generation stationary gas turbines coming online. These weigh up to 440 metric tons—nearly a million pounds of hardware! But at the heart of the latest combined-cycle gas turbine (CCGT) plants lies innovation, not just gigantic size.

09/01/2008


Technology advances in industry often proceed at a slow, conservative pace. This applies more so to large, complex systems like the new-generation stationary gas turbines coming online. These weigh up to 440 metric tons—nearly a million pounds of hardware! But at the heart of the latest combined-cycle gas turbine (CCGT) plants lies innovation, not just gigantic size.

For example, the newest gas turbines apply single-crystal materials, super alloys, special thermal coatings, and—in one design—closed-loop steam cooling to reach 60% thermal efficiency and beyond. Moreover, the turbine systems are said to produce fewer emissions than conventional CCGT plants. Even substantially higher efficiency is possible in a cogeneration plant, where excess generated heat is put to use for process or domestic heating, in addition electric power generation.

A key enabler of thermal efficiency is turbine design with higher temperature combustion and exhaust gases. However, this requires special cooling at the hottest section of the turbine. GE Energy uses steam cooling in its H system turbine that operates as hot as 1,430 °C (2,606 °F). Siemens Power Generation has opted for all air-cooling, because this method is considered simpler than steam cooling and offers more design flexibility by avoiding dependence on the steam cycle, according to Siemens.

Use of advanced materials also enables higher temperature operation. GE’s H turbine uses single-crystal materials in first-stage blades and vanes that endure extreme temperatures over a long service life. Similarly, row 1 turbine blades of Siemens’ SGT5-8000H machine are made of specialized high-temperature alloy material to combat long-term effects of high-temperature and stress (creep deformation).

Proof of the gas turbine’s viability comes after its incorporation into the combined-cycle system, notes Phillip Ratliff, director of next-generation gas turbines at Siemens. This is scheduled in phase 2 of development for the Irsching CCGT plant in Southern Germany (see Advancing Technology column, Control Engineering , August 2008). “The idea was to build a gas turbine for the most efficient and operationally flexible combined-cycle power plant,” says Ratliff. “However, the gas turbine is a major contributor to the eventual plant’s success; in fact it’s the driver for the high-temperature steam cycle.”

Ratliff is confident about the technological success of Siemens’ CCGT system, but has some concern about economic issues, such as cost of fuel and high-temperature materials used in the plant. In fact, fuel cost makes up the biggest expense to run a gas-fired power plant.

And that’s the main reason for developing CCGT power plants of the highest efficiency.

www.ge.com

www.siemens.com





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me