NEMA publishes electric lamps specification

10/03/2006


On behalf of the American National Standard Lighting Group (ANSLG), NEMA has published “ANSI_ANSLG C81.61-2006, American National Standard for Electric Lamp Bases-Specifications for Bases (Caps) for Electric Lamps.” This standard sets forth the specifications for bases used on electric lamps.

 

The 2006 edition of ANSI_ANSLG C81.61 includes a reference to all IEC base standard sheets adopted as American National Standards (ANS); standard sheets for a small number of bases, used mainly in North America that are not harmonized with IEC; and any U.S. deviations to the IEC standard sheets, which have been adopted as Nationally Acknowledged International Standards that are published in IEC 60061-1. Part IV contains an informative annex on first vs. third angle projection and related standards. Because this standard is under continuous accreditation maintenance, the following are the changes of record affecting the 2006 edition:

1. SX4s/4 Flanged CAPS: ANS Standard Sheets 1-850-1 is superseded with IEC Standard Sheets 7004-97-2. Description: "Submidget flanged base for subminiature lamps."

2. PGJ19 CAPS for the H8B, H9B and H11B Lamps: Adopted IEC Standard Sheet 7004-146-1.

3. W(X)(Y)3x16q BASE: IEC Standard Sheets 7004-106-3 supersedes IEC Standard Sheet 7004-106-2. Description: "Red Double Filament Lamps Base."

4. GX8.5 BASE: USA adopted IEC Standard Sheets 7004-143-1.

5. GX10 BASE: USA adopted IEC Standard Sheets 7004-144-1.

This description is provided by the staff of the American National Standard Lighting Group that directs and administers the expert work groups of the Accredited Standards Committee "C81" on Electric Lamps.

ANSI_ANSLG C81.61-2006 may be purchased for $320.00 by visiting www.nema.org/stds/c81-61.cfm or by contacting Global Engineering Documents at (800) 854-7179 (within the U.S.), (303) 397-7956 (international), (303) 397-2740 (fax), or on the Internet at global.ihs.com .





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me