NEBB appoints 2014 president, board of directors

The National Environmental Balancing Bureau has selected its board for 2014.

11/21/2013


The Board of Directors of the National Environmental Balancing Bureau (NEBB) has named Robert (Bob) Linder, PE, LEED AP, NEBB CP, as 2014 NEBB President during the NEBB Board of Directors Meeting, October 18-19, 2013, held in Monterey Bay, Calif. He succeeds Stan Fleischer, who served as the 2013 NEBB President. 

Linder is a Senior Project Manager for Karges-Faulconbridge Inc. in St. Paul, Minn. He has more than 20 years of management and leadership experience in the areas of Whole Building Commissioning, Retro-Commissioning and Testing, Adjusting, and Balancing.  Bob has been a NEBB Certified Professional in Testing, Adjusting and Balancing since 2000. He is also a NEBB Certified Professional in Commissioning and Retro-Commissioning. He is a graduate of the University of Wisconsin – Madison with a Bachelor of Science in Mechanical Engineering.

James (Jim) Huber, PE, LEED AP, NEBB CP, will serve as President-Elect in 2014 and will assume the role of NEBB President in 2014. Bob has more than 17 years of management and leadership experience in the areas of commissioning, retro-commissioning and Test & Balance. He is the past Chairman of the NEBB’s Building Systems Commissioning Committee and is a member of NEBB’s Board of Directors. Bob is a graduate of the University of Wisconsin – Madison. 

Below is a list of 2014 NEBB Board of Directors: 

  • Bob Linder, President
  • James Huber, President-Elect
  • Jean-Paul LeBlanc, Vice President
  • Stephen S. Archer, Treasurer
  • Steve Clark
  • Bohdan (Don) Fedyk
  • Stanley J. Fleischer
  • Donald E. Hill
  • Jim Kelleher
  • Michael Locke
  • Leonard Maiani
  • Nicholas D. White
  • Chris Wright


No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me