NASCAR driver, an engineering major, appreciates high technology, charity donation

Vecoplan donated to a NASCAR effort that aims to deliver 500,000 lb of food and supplies to families in U.S. racing communities; the driver, an engineering major, and team owner of the #23 Vecoplan Ford Mustang toured a Vecoplan plant and noted appreciation for its high-tech biofuel and bioenergy products.

07/11/2013


Harrison Rhodes, driver of the Rick Ware NASCAR race team #23 Ford Mustang, visited the Vecoplan headquarters and manufacturing in High Point, NC. In this manufacturing bay, Vecoplan employees interact with the car and crew. Courtesy: Vecoplan LLCVecoplan, provider of technologies for processing waste into biofuel and bioenergy feedstock, sponsored car #23 at the NASCAR Nationwide “Feed the Children 300” on June 28 at Kentucky Speedway. Race team members toured a Vecoplan plant and expressed appreciation for engineering technologies applied there. The race was sponsored by Feed The Children, and through a partnership with Speedway Children’s Charities, Feed The Children will deliver 500,000 pounds of food and supplies to families in U.S. racing communities. The #23 Vecoplan Ford Mustang was fielded by Rick Ware Racing and driven by Harrison Rhodes, an engineering major.

The Monday after the race, Harrison Rhodes, Rick Ware, and other members of the race team brought the #23 car to Vecoplan’s headquarters and manufacturing plant in High Point, NC. After answering questions, Harrison and other members of Rick Ware racing toured Vecoplan’s test lab, engineering departments, manufacturing plant, parts and service departments, and offices.

As an engineering major at NC State University, Rhodes took special interest in Vecoplan’s two engineering departments, product engineering and engineering project management, expressing interest in the large Vecoplan engineering staff. Rhodes, noting appreciation for Vecoplan products and support, said: “The shredders they design for recycling, plus the size and sophistication of the systems they engineer and build for turning waste into a fuel, are truly impressive.”

Vecoplan, which provides technologically advanced machinery and systems for the processing of waste, designs, engineers, manufactures, installs, and provides start-up training on, as well as ongoing parts and service for complete systems used to prepare and feed municipal solid waste (MSW) for use: as alternative fuel in the production of heat and power, as a feedstock for pelletizing, and as a feedstock for conversion to syngas, methanol, cellulosic ethanol, biodiesel, and other liquid biofuels. Vecoplan also has experience with tires, wood, biomass, carpet, and other industrial wastes. Stated capabilities include unloading of raw feed-stocks, pre-shredding, ferrous separation, conveying, screening, air classification, re-shredding, non-ferrous separation, optical separation, testing stations, storage, and metered feeding to the boiler, to the pelletizing machinery, to the liquid fuel conversion system, or to other waste conversion technologies.

According to Len Beusse, COO – Vecoplan LLC, “This race was the perfect opportunity for Vecoplan. We’re located in the south, the birthplace of NASCAR, our subsidiary Vecoplan Midwest is about 30 minutes from Kentucky Speedway, we’re neighbors with the fine folks at Rick Ware Racing, Harrison Rhodes is not only an up and coming driver but also a young Christian man of character and integrity, and our company mission ‘Technology for a Sustainable Tomorrow,’ ties in perfectly with ‘Feed The Children 300,’ after all the reason we strive for a sustainable tomorrow is for our children.”

www.VecoplanLLC.com

- Edited by Mark T. Hoske, content manager CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske@cfemedia.com.

ONLINE

See more photos from NASCAR visit at this Vecoplan LLC manufacturing site.

See more below from Control Engineering about the VIC/HMI control panel from Vecoplan.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me