Motor designs focus on energy efficiency

Of the total cost of ownership of an electric motor in an industrial or commercial application, approximately 2% is the amount paid to purchase the motor. The remaining 98% is the cost of powering the motor over its lifetime.

02/14/2012


Of the total cost of ownership of an electric motor in an industrial or commercial application, approximately 2% is the amount paid to purchase the motor. The remaining 98% is the cost of powering the motor over its lifetime. Hence, the energy efficiency of the motor weighs heavily in the purchase decision, with motor designers and manufacturers focused on delivering increased efficiency in the most economical means possible.

Fewer losses with materials

Traditional ways to improve motor efficiency include using better materials or using more materials. Better materials include higher quality steel with lower core loss or thinner laminations for motor construction. Both of these approaches, however, involve higher motor manufacturing costs. Another approach is to use more steel, thereby lowering flux density and losses and allowing room for more winding material, which in turn reduces the resistance and conduction losses. Adding materials, of course, increases the cost of the motor.

Beyond system design considerations, motor manufacturers are looking at motor designs for additional efficiency gains beyond NEMA Premium motors; the graph shows the efficiency difference in fan application. Courtesy: NovaTorque

Several more innovative approaches to improving efficiency are currently being attempted in the industry. For induction motors, the most notable change is the move from cast aluminum rotors to cast copper rotors. This can raise efficiency by about 1% at three horsepower (3 hp). However, the cost of cast copper rotors is a significant factor.

Variable speeds

Another approach is to use an electronic drive to operate motor systems at variable speeds. For many applications, this has the greatest energy savings potential. In some systems, this can save 50% or more of the total energy that would be consumed by a fixed-speed system without an electronic drive. The cost of adding the electronic drive to achieve variable speed can quickly be recouped with the savings from reduced energy consumption.

NovaTorque Premium Plus+ motors offer higher efficiency and smaller size at a price competitive to current NEMA Premium induction motors, the company said. Courtesy: NovaTorque

An emerging trend in product design is to change from induction motors to using permanent magnet motors with electronic drives, even in some fixed-speed applications. This is because permanent magnet motors can have higher efficiency and smaller size for the same output power. This saves on energy costs and can reduce overall product size and weight. Slowing this trend have been the recent dramatic increase in the price of rare earth magnet material and the increasing uncertainty of its supply.

Design example

A new motor category introduced by NovaTorque Inc. takes advantage of inherent energy efficiency of a permanent magnet motor, but without the increased costs associated with rare earth magnets. This design is an axial interior permanent magnet motor. A conical rotor and stator geometry concentrate magnetic flux in the field poles, allowing the use of low-cost, readily available, ferrite magnets, with performance and efficiencies equivalent to or better than conventional rare-earth-based motors. In variable-speed, variable-torque applications, such as fans or pumps, energy savings can exceed 10% when compared to NEMA Premium efficiency ac induction motors.

- Alan Crapo is vice president–engineering, NovaTorque Inc. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering.

www.novatorque.com 

http://controleng.com/motors 

Advanced motor design: New Motors Reach New Applications

http://www.controleng.com/home/single-article/advanced-motor-design-new-motors-reach-new-applications/091900ae47.html 

Motors deliver more efficiency than NEMA Premium

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=40937



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me