Motor controller designed to improve motor protection and increase wire efficiency

Mitsubishi Electric Automation's MMP-T32 motor controller protects the motor branch circuits from overload or phase loss during short-circuit conditions while reduces the number of required devices and wiring.

05/22/2014


Mitsubishi Electric Automation's MMP-T32 motor controller protects the motor branch circuits from overload or phase loss during short-circuit conditions while reduces the number of required devices and wiring. Courtesy: Mitsubishi Electric AutomationMitsubishi Electric Automation's MMP-T32 motor controller is designed to protect the motor branch circuits from overload or phase loss during short-circuit conditions by integrating low voltage circuit breaker and thermal overload relays.

The MMP-T32 motor controller incorporates low voltage circuit breakers and thermal overload relays in a single unit while reducing the number of required devices and eliminating about 50% of the wiring.

The MMP-T32 motor controller can also be used as an IEC circuit breaker (IEC60947-2) or a UL60947-4-1A type E self-protected manual motor controller. The MMP-T32 can also function as a UL60947-4-1A type F self-protected combination motor controller when paired with Mitsubishi Electric MS-T series magnetic contactors.

Mitsubishi Electric Automation Inc.

www.meau.com 

- Edited by CFE Media. See more Control Engineering motor and drive products.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.