More packaging machines, construction equipment, testing standards

Expansions: Packaging machinery shipments went up last year, says PMMI. An AEM study shows construction equipment exports were up midyear 2008 (see table). TÜV SÜD America is doubling the number of its testing standards. A motor manufacturer purchased a maker of mechanical power transmission components (photo).


Packaging machinery shipments went up last year, according to PMMI, while an AEM study shows that construction equipment exports were up at midyear 2008. And TÜV SÜD America is doubling the number of its testing standards. A motor manufacturer purchased a maker of mechanical power transmission components. 
U.S. shipments of packaging machinery rose 3.9% in 2007 , at a value of $6.207 billion, according to the PMMI 2008 Shipments & Outlook Study , an annual research report based on data gathered from 369 U.S. and Canadian machinery manufacturers that includes forecasts and detailed analyses for 17 machinery categories.
PMMI believes the sales numbers, in the face of a slow economic period, illustrate the strength of PMMI member company market position,” said Charles D. Yuska, president and CEO, PMMI.
The 3.9 percent increase in 2007 extends the streak of machinery shipment gains to six consecutive years.
The Study showed that more than three-fourths of machinery sales go directly to end-use consumers through in-house sales staff or manufacturer’s reps.
Yuska said market segments with the greatest demand for packaging machinery were food (37.9% of sales), beverage (22.3%), and pharmaceutical/medical device (9.9%). The three end-use markets account for 70% of total shipments, slightly lower than in 2006, because spending in the pharmaceutical and beverage markets slowed.
Canadian packaging machinery shipment growth passed U.S. growth for the first time in five years, increasing 5.7%. Canadian gross domestic product was 2.7% vs. 2.0% in the U.S. Nearly two-thirds of Canadian shipments are exported, primarily to the U.S. Canada’s sales to end-use markets are similar to U.S. sales, with the same top three segments (food, beverage and pharmaceutical) totaling nearly the same.
Participating PMMI member companies receive the final report free of charge; other PMMI members can purchase it for $1,500; non-members, for $2,500.

Baldor now owns Maska, a designer, manufacturer, and marketer of sheaves, bushings, couplings, and related mechanical power transmission components.

Baldor Electric Co. has acquired Poulies Maska Inc. of Ste-Claire, Quebec, Canada. Maska is a designer, manufacturer, and marketer of sheaves, bushings, couplings, and related mechanical power transmission components, with 180 employees and a new facility in China. Last year’s sales were approximately $33 million. John McFarland, chairman and CEO of Baldor , said that over the last five years Maska’s sales and profits increased by nearly 50% and that their sheaves and bushings complement Baldor’s Dodge line with each having success in different parts of the market.
Maska’s operating and gross margins exceed Baldor’s overall margins and the company will now have the leading market share in sheaves and bushings in North America. Baldor will have a second plant in China to support international growth.
The transaction was funded by cash and an existing credit facility; additional terms were not disclosed.

U.S.-made construction machinery exports gained 24% at midyear 2008 , compared to the first half of 2007, for more than $10 billion dollars worth of equipment shipped to global markets, according to data from the Association of Equipment Manufacturers (AEM) .
Table: 11 countries buying the most U.S.-made
construction machinery,

1 Canada
2 Australia
3 Mexico
4 Chile $406 million, up 17%
5 South Africa
6 Belgium
7 Brazil $258 million, up 59%
8 Singapore
9 Russia
10 Colombia $230 million, up 4%
11 China $224 million, down 30%

The trade group consolidates U.S. Commerce Department data with other sources into a quarterly global export trends report for members.
Major world regions recorded double-digit growth except for Central America, with a 3% increase. Africa led with a 59% gain followed by South America with growth of 30%.
Africa purchased $692 million worth of U.S.-made construction equipment, a gain of 59% during January-June 2007. South America took delivery of $1.4 billion worth of construction machinery, a 30% increase beyond 2007 first-half purchases. Exports to Central America came in at $838 million, a 3% gain.
Exports of construction equipment to Asia totaled $1.35 billion, a 16% increase compared to the first half of this year. Exports to Australia/Oceania rose 19% to $856 million for the first half of 2008.
Europe tallied purchases of $1.6 billion dollars worth of construction equipment, a 21% increase, and construction machinery exports to Canada rose 28% for January-June 2008 at $3.35 billion.
“The lack of U.S. infrastructure investment is eroding America’s position as a global economic power as nations around the world substantially increase their commitments to modern transportation networks,” said AEM senior vice president Al Cervero. “In the United States, traffic gridlock is estimated to cost $78 billion dollars a year on the American economy and productivity, in addition to adverse effects on safety and the environment. Federal legislators must take this issue seriously, and invest adequately for current and future needs as part of a longer term comprehensive strategy.”
TÜV SÜD America Inc . doubled its testing standards and is now able to offer customers product testing on more than 140 UL/ANSI standards. Recognized by OSHA (Occupational Safety & Health Administration) as a Nationally Recognized Testing Laboratory (NRTL), TÜV can perform electrical safety certification to North American requirements for medical devices, machinery, IT equipment, and laboratory test and measurement equipment, including uninterruptible power supply equipment and handheld motor-operated electric tools 
Recognized Testing Laboratories are private third-party organizations recognized by OSHA under Federal code 29 CFR 1910.7 to provide product safety testing and certification services for a range of products used in the U.S. workplace. TÜV offers product testing to 147 product standards. Joe Janeliunas, director of Product Safety Services for TÜV SÜD America, said, "Product safety testing is very important for our customers in their ability to meet national regulatory requirements to avoid delays in deliveries to their customers. Our . . . quick turnaround times allow the manufacturers to meet their demanding scheduling in getting products to the marketplace.” 
In addition to being an NRTL, TÜV SÜD is an SCC- accredited Certification Body, a European Union Notified Body, and a National Certification Body (NCB), accreditations that permit the company to test to multiple-country testing schemes simultaneously, providing a fast, low-cost alternative to global product safety certification. 
TÜV SÜD America also offers standards and certification training tools including free live and on-demand webinars, public training, and private in-house seminars.

Control Engineering News Desk
Register here and scroll down to select your choice of free eNewsletters .

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me