Minor price increases for 2003

Prices are heating up, manufacturing costs are rising, margins are getting squeezed…but the outlook for 2003 doesn't look too scary for plant engineers who have to oversee plant construction and maintenance. That's because only four industries in our composite index are expected to hike their average product prices by more than 2% in 2003.

08/08/2002


Prices are heating up, manufacturing costs are rising, margins are getting squeezed…but the outlook for 2003 doesn't look too scary for plant engineers who have to oversee plant construction and maintenance. That's because only four industries in our composite index are expected to hike their average product prices by more than 2% in 2003.

At the top of the inflation list, gypsumboard and other gypsum product prices are forecast to rise 4.8% next year. The last three months of 2002 will be roughest as average tags are expected to gain 4.2% from the third quarter. Gypsum tags will continue to grow in the first two quarters of 2003 before falling 2.9% in the final half of the year. But compared to inflation rates of 20% and more in 2001, the coming year looks tame.

More troubling for plant managers who have to plan their 2003 plant maintenance budgets is the expected price turnaround in the steel pipes and tubes industry. Here average product prices fell 2.6% in 2001 and are expected to fall 0.3% in 2002. But with U.S. steel tariffs in place and retaliatory tariffs overseas, the steel pipes industry will push through a 3% average price hike in 2003. The industries that make metal doors and sheet metal work also will increase prices around 0.6% to 0.7% in 2003 after modest price declines the previous year.

Prices for wiring devices will increase 1.6% to 2% as well. That will be a shift from 2002's expected 0.4% price decline for current-carrying devices and a meager 0.3% price increase for noncurrent-carrying. On the other hand, buyers of paints probably won't benefit by pre-purchasing supplies. The annual inflation rate for products made by the paints industry is forecast to remain at 2.3% next year, unchanged from the previous two years.

Price/cost/demand roundup

Average Product Prices

Direct Mfg. Costs

Growth in U.S. End Markets

Change, %, During 12-Mo Ending...

and Margins Grade

Change, %, During 12-Mo Ending...

Industry

SIC

Feb 02

May 02

Costs are...

Grade

Feb 02

May 02


the average producer in an industry. Grades of A to A+ mean plant engineers may be able to strike a better bargain with suppliers and better control plant costs.

General Sawmills and Planing Mills

2421

-1.78

-0.11

stable

C

-1.97

-1.81

Millwork

2431

2.29

2.06

falling

B

0.20

-1.03

Hardwood Veneer and Plywood

2435

0.17

0.24

stable

A

-1.82

-2.06

Softwood Veneer and Plywood

2436

0.41

3.19

falling

D

-1.82

-2.06

Metal Partitions and Fixtures

2542

0.56

0.09

rising

C

-0.72

-1.58

Paints and Allied Products

2851

2.23

2.13

stable

A

-1.81

-1.04

Flat Glass

3211

-0.47

-1.75

stable

F

-5.80

-5.30

Other Structural Clay Products

3259

5.57

4.02

rising

A

0.36

-1.03

Gypsum Products

3275

-17.52

-8.26

stable

D

-1.22

-1.90

Mineral Wool

3296

-0.42

0.28

stable

D

-0.50

-1.25

Steel Pipes and Tubes

3317

-3.09

-2.55

rising

A

-5.78

-4.94

Plumbing Fittings and Brass Goods

3432

-1.46

-1.37

stable

C

0.04

-1.11

Metal Doors, Sash and Trim

3442

1.07

0.97

rising

B

-0.03

-1.15

Sheet Metal Work

3444

-0.44

-0.51

rising

B

-3.73

-3.81

Refrigeration and Heating Equipment

3585

0.22

0.39

stable

C

-1.13

0.68

Current-Carrying Wiring Devices

3643

-1.21

-1.38

stable

D

-3.06

-3.55

Noncurrent-Carrying Wiring Devices

3644

1.78

1.49

rising

B

-3.06

-3.55

Commercial Lighting Fixtures

3646

-0.22

-0.70

stable

F

-1.05

-1.88

Environmental Controls

3822

0.11

0.16

stable

F

0.13

-0.07





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me