Military adaptation: Use aerial reconnaissance technology to monitor your plant

02/15/2007


You may have seen stories on TV about small radio-controlled aircraft performing dangerous recon duties in hostile situations. An Air Force technician can sit safely in a control bunker and fly a UAV (unmanned aerial vehicle) into a situation much too dangerous for a helicopter, guiding fire control or smart bombs, or sending back video. It's fascinating technology and has probably spared many lives. Now that same technology is available for your plant.

VistaNav-SSR from Mercury Computer Systems is a fully integrated system which includes a ground station, integrated VistaNav synthetic vision system, the actual aircraft (aerial vehicle), and assorted electronic sensors. It's basically everything you need to fly the UAV and receive information back. Mercury is no newcomer to this technology. It is a major supplier for military systems in all sorts of applications and has been developing 3D vision for more than 20 years.

We aren't talking about a little model airplane. This UAV is about 10 ft long with a 9 ft wingspan. It weighs a maximum of 80 lb at takeoff and needs a runway 300 ft long. This is a serious aircraft, and can carry a lot of instrumentation and control equipment.

Imagine this situation: You have a pipeline or electrical transmission lines to check out. Maybe you haven't done a thorough inspection of your tank farm in a while. You send out your UAV to have a look. It navigates using GPS and terrain feature identification based on information from a Federal Government database. With synthetic vision capability, it can create its own 3D terrain mapping for you, with as much detail as you need for your application.

For an easy surveillance mission, the plane can send back live video if it's line-of-site. If live video isn't practical, it can inspect an area on its own, and record odd situations based on anomaly detection software. It will take pictures or video of what it doesn't think should be there, and send them back via satellite link. If you're concerned about something being too hot or cold, use an infrared sensing camera.

With a full fuel tank, the craft can stay aloft for more than five hours. If you want a long view, it can reach an altitude of 10,000 ft. For something more close-in, bring it down to 200 ft. It can fly lower, legally, than a manned aircraft. Since it has to fly in the same airspace as commercial and private planes, your UAV can have an air traffic control transponder and be equipped with the latest in collision avoidance technology.

"Building on the success of our VistaNav general aviation synthetic vision system, we are extending the benefits of 3D situational awareness to small unmanned aircraft systems," said Philippe Roy, Director and General Manager of the Navigation & Simulation Systems Group at Mercury. "VistaNav-SSR is an affordable, easy-to-use system that will enable customers to perform very high-performance missions while significantly minimizing human error and, more importantly, human fatalities in hazardous but necessary applications."

Of course, the notion of affordable is relative. "A simple system, with line-of-site video, no satellite communication, and basic controls starts around $100,000 to $150,000," says Roy. "With satcom, anti-collision capabilities, multiple aircraft tracking ground station capability, it can run $700,000. The configuration is very scalable."

Although it seems expensive, compare it against the alternatives. There may not be many ways to gather the same information that are much cheaper.

Control Engineering Daily News Desk
Peter Welander , process industries editor





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me