Mechatrolink membership continues growth

The Mechatrolink Members Association (MMA), a group of product developers that use and promote Mechatrolink, reached its 900th member. 50 firms in North America are currently members. Mechatrolink is available in RS-485 and Ethernet versions, operates at speeds up to 100 Mbps, and can support up to 62 simultaneous devices.

08/22/2011


The Mechatrolink Members Association (MMA) announced that its membership has reached the 900 member plateau, including 50 firms in North America. The MMA is a group of Mechatrolink product developers and users who promote the use of Mechatrolink, an industrial network optimized for motion control.

The MMA is an independent non-profit organization that makes Mechatrolink specifications and operating parameters available. The organization also works to ensure that products labeled as MMA-compatible meet the relevant specifications. The MMA is continually improving network performance and actively recruiting new members.

“Mechatrolink is the most widely used motion control network in Asia,” says Derek Lee, a representative of MMA North America, “We also welcome the relatively large number of North American companies to the MMA.”

Mechatrolink reportedly connects devices such as servo motors, servo amps and I/O to each other and to motion controllers such as PLCs, PACs and motion controllers. Mechatrolink is available in RS-485 and Ethernet versions, operates at speeds up to 100 Mbps, and can support up to 62 simultaneous devices.

“It’s rapidly reaching the point where, to sell machine controls and factory automation into the Asian market, a company’s best approach is to use Mechatrolink,” said Lee.

North American members include Cleveland Motion Controls, National Instruments, Manufacturing Data Systems, Phoenix Contact, Red Lion Controls, Texas Instruments, Turck, Yaskawa and many others.

Over the last 20 years since Mechatrolink was established, more than 2 million Mechatrolink devices have been shipped, and more than 300 products have been certified to Mechatrolink specifications. 

MMA provides worldwide support for Mechatrolink with affiliates in Germany, Japan, China, Korea and the U.S.—and Mechatrolink is in the process of becoming an official international IEC standard for industrial communication networks.

www.mechatrolink.org

Mechatrolink Membership Association (MMA)

- Edited by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Getting ready for industrial IoT; Visualizing the (applied) automation continuum; Preventing VFD faults and failures; Using wireless for closed-loop applications
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.