Measurement trends survey shows need for greater speed and resolution

Engineers appear to want more performance than ever before from the tools they use, a recent survey from Keithley Instruments indicates.


Engineers appear to want more performance than ever before from the tools they use, a recent survey from Keithley Instruments indicates. The annual study, the fourth conducted by the Cleveland- based manufacturer, charts trends and market needs for measurement products and technologies used by engineers. Nearly 800 respondents participated in this year's survey.

The most dramatic increases in performance were for speed and resolution requirements. The number of respondents needing more than 1000 readings/ sec rose from 19% to 31% of the market. Even more significant, those requiring 18 to 19+ bit resolution today more than doubled, from 7% last year to 18% this year. This tremendous increase in requirements for speed and resolution, the company reports, clearly indicates that new products and processes require more measurements be performed more rapidly and with greater precision.

Interestingly, the study showed little change in remote measurement and data acquisition use, with 18% reporting that they obtain data from sensors outside the plant. Last year, the number was 19%. The study concluded that it appears even though people are drawn to the concept of Ethernet or internet-based measurements, in reality they are still difficult and relatively expensive to perform.

In another area, despite its expected and anticipated demise, the serial bus is still popular. Use has actually increased 10 points from 2-yr ago to 81%. However, rapid adoption of the USB protocol is still anticipated and current use has more than doubled to 15% in 1999 from 7% in 1998. Although Firewire, the other popular protocol, has not climbed into double-digit use as yet, engineers are still optimistic about its eventual acceptance.

When asked about operating systems and programming languages, respondents voted in favor of open solutions based on Microsoft tools. The market appears to be moving rapidly from Windows 95 to NT/2000. Visual Basic and C/C++ are the dominant software languages.

Copies of the survey may be downloaded from the company's web site at whats_new/whatsnew.html. Or contact Keithley at 28775 Aurora Rd., Cleveland, OH 44139-1891; phone: 440-248-0400; fax: 440-248-6168.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me