MAPI report: Manufacturing recovery still a work in progress

A number of positive trends are emerging as the United States digs itself out of the recession, but there remain cautionary signals that growth will be muted and the rebound restrained, according to a new report. The Manufacturers Alliance/MAPI Quarterly Economic Forecast predicts that inflation-adjusted gross domestic product will experience 2.

03/01/2010


 

A number of positive trends are emerging as the United States digs itself out of the recession, but there remain cautionary signals that growth will be muted and the rebound restrained, according to a new report.

The Manufacturers Alliance/MAPI Quarterly Economic Forecast predicts that inflation-adjusted gross domestic product will experience 2.8% growth in 2010, followed by 3% growth in 2011. By supplying major assumptions for the economy and running simulations through the IHS Global Insight Macroeconomic Model, the Alliance generates unique macroeconomic and industry forecasts.

A number of factors are in play during the recovery: the consumer, though still burdened by feeble income and job growth, will receive some relief via transfer payments and tax cuts that in turn will boost spending; parts of investment—most notably in transportation equipment, information technology, and residential housing—will increasingly provide the demand surge needed to sustain production growth; the swing in business inventories will provide growth momentum as firms reduce destocking and eventually rebuild inventories; and federally funded stimulus outlays will contribute to the government spending stream through 2011.

“The overall economy grew in the third and fourth quarters of 2009 and high frequency data point to moderate economic performance in the first quarter of 2010,” said Daniel J. Meckstroth, Manufacturers Alliance/MAPI Chief Economist. “Similarly, manufacturing production hits its trough in June 2009 and has increased over 5% through January 2010. A moderate recovery is undoubtedly under way, but it is the pace of future near-term growth that is questionable.

“We believe that consumers will continue to deleverage and that the previous growth model based on credit availability to marginally creditworthy borrowers is not repeatable. Government tax cuts have replaced lost income for the moment, but eventually spending has to be grounded on wage increases and employment growth. A jobless recovery is not an option in this cycle.”

Manufacturing production growth declined 11.2% in 2009. It is expected to rebound to 5.4% growth in 2010, and 5.3% more growth in 2011.

Production in non-high-tech industries is expected to increase by 3.3% in 2010 and by 4.8% in 2011. High-tech manufacturing production is anticipated to improve significantly, with solid 14.6% growth in 2010 followed by robust 17.8% growth in 2011.

The forecast for inflation-adjusted investment in equipment and software is for 9.4% growth in 2010 and for 12.1% growth in 2011. Capital equipment spending in high-tech sectors will continue the improving trend. Inflation-adjusted expenditures for information processing equipment are anticipated to rise by 8.1% in 2010 and to increase by 6.7% in 2011.

MAPI expects industrial equipment expenditures to improve by 6% in 2010 and by 17% in 2011. The outlook for spending on transportation equipment is for a healthy 50.1% increase in 2010 and a 33.6% advance in 2011. These figures should help compensate for a 48.7 decline in 2009.

Spending on non-residential structures is the lone GDP expenditure category expected to retrench in each of the next two years, declining by 14.6% in 2010 before decreasing further, by 6.2%, in 2011.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me