Manufacturing technology consumption sees huge boost in March

Technology consumption was up 57.6% from February and almost twice as high as March 2010.


March U.S. manufacturing technology consumption totaled $511.15 million, according to American Machine Tool Distributors’ Association (AMTDA) and Association For Manufacturing Technology (AMT).  This total, as reported by companies participating in the USMTC program, was up 57.6% from February and up 99% when compared with the total of $256.88 million reported for March 2010.  With a year-to-date total of $1.2 billion, 2011 is up 118.6% compared with 2010.

 These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

 Machine tool sales exceeded expectations again in March and by a large margin; this is a great sign for the U.S. economy,” said Peter Borden, president of AMTDA. “Not only are customers modernizing to become more efficient and to increase capacity as energy and commodity prices rise, but also supplier price increases and reduced inventories seem to be pulling orders sooner in order to use year-end depreciation tax advantages.”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and
related equipment. Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

March manufacturing technology consumption in the Northeast Region totaled $76.41 million, up 39.9% from February’s $54.63 million and up 112.6% when compared with the March 2010 total. With a year-to-date total of $180.84 million, 2011 is up 104.3% when compared with 2010 at the same time.  

Southern Region

Southern Region manufacturing technology consumption in March stood at $45.68 million, 33.0% higher than February’s $34.35 million and 3.1% higher than the total for the previous March. With a year-to-date total of $133.62 million, 2011 is up 45.8% when compared with 2010.

Midwest Region

Manufacturing technology consumption in the Midwest Region in March rose to $214.18 million, up 94.2% from February’s $110.29 million and up 174.8% when compared with the March 2010 figure. The $436.75 million year-to-date total is 175.1% more than the total for the same period in 2010.

Central Region

Central Region manufacturing technology consumption totaled $126.18 million in March, 28.9% higher than February’s $97.88 million and up 99.7% when compared with the total for March 2010. At $333.38 million, 2011 year-to-date is up 136.4% when compared with last year at the same time.

Western Region

At $48.70 million, March manufacturing technology consumption in the Western Region was 79.3% higher than February’s $27.17 million and up 37.3% when compared with last March. The year-to-date total of $118.97 million is 68.6% more than the comparable figure for 2010.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me