Manufacturing's future: Punctuating the discussion

I'll be moderating a discussion at National Manufacturing Week in suburban Chicago on Sept. 26. We'll talk about “The Future of Manufacturing.” It's a pretty weighty topic, but drinks will be served, so I think we'll get through it just fine. Any discussion about the future of manufacturing depends how you punctuate that phrase, and how that phrase gets punctuated depends on who you...

09/15/2007


I'll be moderating a discussion at National Manufacturing Week in suburban Chicago on Sept. 26. We'll talk about “The Future of Manufacturing.” It's a pretty weighty topic, but drinks will be served, so I think we'll get through it just fine.

Any discussion about the future of manufacturing depends how you punctuate that phrase, and how that phrase gets punctuated depends on who you're having the discussion with.

The Future of Manufacturing? Most people who use a question mark these days are those pundits (and the occasional presidential candidate) who want to blame manufacturing's malaise on (pick one) NAFTA, cheap foreign labor, immigration policy, taxes, Washington, a failure in education, currency manipulation or the bogeyman. Granted, the bogeyman doesn't get mentioned directly, but it has to be someone else's fault, right?

The Future of Manufacturing! In fairness, most people who are that excited about manufacturing these days would have to be guilty of what former Federal Reserve chairman Alan Greenspan would call “irrational exuberance.” Energy prices are high and the labor pool is shrinking. We no longer corner the market on innovation and skill %%MDASSML%% not to mention hard work. The world has caught up in many cases, passed us in others and shows no signs of slowing down.

The Future of Manufacturing… leads you to wonder what's next. That's certainly one of the points I plan to make at the discussion on Sept. 26. The future depends on answering so many of the questions and replacing exuberance with realism and a rededication to hard work and bright ideas.

There's no shortage of either, but neither is there the hell-bent-for-leather fervor for it in manufacturing. The easy solution is to point elsewhere for the cause rather than seeking the solution.

Sure, labor is cheaper other places. Look at toy recalls and tainted food to understand the additional cost sometimes associated with cheap labor. Look at the total cost of manufacturing %%MDASSML%% getting the product from where it is made to where it is used %%MDASSML%% and you find the margins are measured in pennies and not dollars.

Sure, federal policies have had an impact, but issues such as immigration and taxes have been with us for decades. Through those decades, when we've worked hard and innovated, we've succeeded, and when we haven't, we've slipped behind. If you're going to tout a free market system to the rest of the world, you'd better be prepared when you get beaten at your own game.

Where will we be in three years? Your responses to our research study, which will also be discussed at our presentation, give us some insight. We'll get more insight from our panelists. But the future doesn't belong to a large group, and it won't be decided by talking about. It is up to each manager, each team and each manufacturer to make the future better. And since the future never really arrives, there's no time like the present to start.

Period.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me