Manufacturing is the core of U.S. economic success

Productivity has more than doubled in manufacturing in last 20 years, which is a boon for competitiveness, wages, and the rest of the economy, says Manufacturers Alliance/MAPI.


Anaheim, CA - U.S. policies make it tough for manufacturing to excel and yet manufacturing continues to drive economic growth. Jeremy Leonard, economist, with Manufacturers Alliance/MAPI, explained to a group of journalists and analysts on Nov. 10 that the U.S. has more manufacturing than any other country, despite higher costs and challenges in getting enough qualified engineers.

Jeremy A. Leonard  Economic Consultant, Manufacturers Alliance/MAPI

Jeremy A. Leonard Economic Consultant, Manufacturers Alliance/MAPI

Leonard, part of the Rockwell Automation Manufacturing Perspectives program, the day before Automation Fair, said policies make it difficult for manufacturers to compete effectively. "We have to ensure offshoring happens for the right reasons, to support foreign markets. Manufacturing will grow faster than the overall U.S. economy growth." The idea that the U.S. doesn't manufacturer anything here anymore is simply false, Leonard said.

"U.S. manufacturing is the engine for growth in the global economy , and I say this over and over again," he noted. Productivity in manufacturing is growing much faster than in the rest of the economy. Productivity has more than doubled in manufacturing in last 20 years, which is a boon for competitiveness, wages, and the rest of the economy, he said.

Manfuacturing is the U.S. growth engine , MAPI says. Also read:

- Demand management during an economic downturn ; and
- Research Rap: Good Economic News for Manufacturing ?


MAPI, based in Arlington, VA, was founded in 1933, as Machinery and Allied Products Institute. MAPI has more than 500 companies as members, including Rockwell Automation. MAPI efforts include a quarterly economic forecast, released Nov. 10. Also in November is an annual update of the organization's five year forecast. U.S. GDP at 3.5% for the third quarter, benefited from the stimulus package and the cash for clunkers program, Leonard said. Next two quarters will deliver anemic growth, perhaps 1%, he predicted.

Consumption spending continues to be hammered because of the housing bust and very weak labor markets, plus, unemployment was above 10% last month, Leonard said. In 2010 we're looking at 0.5% growth. Why? Capacity utilization has plummeted to lows unseen since the Great Depression and that has to be filled before additional capacity is built, Leonard explained. Unemployment will remain at double digits through 2010, as companies seek a more firm confirmation of economic recovery, he predicted. Until then, they're likely to be conservative with spending.

Leonard expressed no immediate concerns about inflation, saying he expects to see the U.S. Federal Reserve move interest rates higher toward end of 2010.

Of U.S. R&D investment, 70% goes to manufacturing, and it's paid off with manufacturing holding 90% of U.S. patents, Leonard said. Manufacturing needs protection, since each $1 investment in manufacturing returns $1.37 in economic growth.

Grinning a bit, Leonard suggested that services cannot provide the economic benefits of manufacturing: "I don't know who said it, but it's true that we cannot add value to the U.S. economy by people giving themselves haircuts."

Manufacturing production has increased over the past last 20 years. While the share of overall U.S. employees in manufacturing has decreased, the volume of what's manufactured has increased. More is being produced with fewer resources, which liberates resources for growth in others areas. I don't think the information industry would exist if manufacturers weren't producing more for less.

Concerns for U.S. manufacturing include high structural costs compared to trading partners, comprised of high corporate tax rates, health care costs, tort liability costs, and high cost of regulatory compliance. There's a skilled labor shortage and the skills gap is projected to increase as the numbers of engineering degrees is down 20% since the mid-1980s. More troubling, 40% of ninth graders will lack skills for tomorrow's manufacturing jobs.
Investment in R&D: 70% of R&D done by business depends on applied research done in federal labs, Leonard said.

What needs to be done? Multinationals should be able to locate jobs outside of U.S. to serve local businesses more cost effectively, but not only to send the goods back to the U.S. for sale, Leonard said, calling on policymakers and politicians to work with business leaders to make the U.S. business environment more efficient and friendly.

- Mark T. Hoske, electronic products editor, Manufacturing Business Technology , MBT

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.