Maintaining healthy levels of indirect MRO inventory

When it comes to stocking indirect maintenance, repair and operating materials, many organizations don’t apply the same rigor that they do with direct materials. And chances are that lack of concern is losing those organizations thousands of dollars.

01/01/2009


Do you know the value of your on-hand indirect materials? Do you know how often they turn? Do you know your optimal stocking levels? Chances are you don’t, and it could be costing you thousands of dollars a year.

Many organizations don’t apply the same rigor when it comes to stocking indirect maintenance, repair and operating materials. However, just like direct materials, there is a carrying cost %%MDASSML%% and even more important, a process cost %%MDASSML%% to everything you keep on your shelves. One could even argue that it’s far more expensive to acquire indirect materials due to the nature of that purchase, which may involve using many different suppliers to essentially buy items that could be purchased from just a few.

More and more business executives are realizing that the next frontier in managing time and costs begins by creating healthier inventory systems for both direct and indirect materials.

Managing your parts

A smart inventory solution program can help curb out-of-control costs, hoarding, overstocks and waste. It starts with organizing and collecting data on the items that are kept on-hand. You need to assign an “Inventory Category” to each item you stock. Products usually fall into one of four categories: fast-moving, critical, slow-moving and inactive.

Fast moving items are items that typically have turns of 10 or more per year. Critical items are those that don’t turn often, however, without them, your company will lose hundreds %%MDASSML%% if not thousands %%MDASSML%% of dollars an hour if you’re not able to easily acquire them. Slow moving inventory may have less than 10 turns per year, and inactive items are those that are not critical and show no use over the last 12 months. Also known as “dead inventory,” inactive inventory is not only wasted money, but it also takes up valuable space.

Once you understand exactly what you should keep on hand, you can establish more realistic stocking levels. At this point, it’s important to create a baseline so you’ll be able to report back future improvements.

Now you’ll need to look at streamlining the replenishment process. Many replenishment options are available to choose from today. It can start with simple bar-coding and scanning technologies to complete on-site, vendor-managed programs, or it can be something more significant. The point is, you’ll need to make a change in how you acquire indirect supplies. Without this change, chances are it won’t take long to end up exactly where you started.

Once the change is in place, you’ll need a process to ensure that any new items added truly should be added. By applying this continuous improvement concept, you’ll need to weigh “cost-to-carry” versus “cost-to-order” in determining if any new items should be placed into stock. By applying these processes, you’ll be well on your way to establishing a healthy inventory program.

By collecting data on items that are kept on hand, users can better identify which parts are fast moving, slow moving or dead inventory.


Author Information

Don Scheibenreif is vice president of strategic marketing for W.W. Grainger Inc. He began his career with The Quaker Oats Co. in 1987 and has since held positions of increasing responsibility with Coca-Cola and the True Value Co.




No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me