Machinery production: A correction or contraction?

With the global economy slowing down, machine production is likely to follow suit.

09/12/2011


Following a generally strong recovery in 2010, the economic outlook at the start of this year appeared to be a reasonably positive one. There were caveats, certainly; Greece’s debt crises and the potential of economic fragility in Ireland and Portugal affecting the Europe to mention two. But these were, on the whole, considered to be diminishing threats to a solid economic recovery. However, the past few months have seen seemingly an endless stream of news items pertaining to further economic woes: first quarter GDP figures were revised down in the UK, the US, Germany and France; many countries GDP forecasts were revised down for the year; the US lost its triple-A credit rating (at least in the eyes of one major ratings agency) and came close to defaulting; Greece requiring a second bailout; the decimation of share prices around the world. The list goes on. 

So, economic output is slowing, that much is evident. But what does it mean for machinery production? Traditionally, machinery production is more-or-less in phase with GDP, so a slowdown in the economy doesn’t really bode well. There are also figures on machinery that point to things slowing down; indices released by the US, Germany and Japan all point to the rate of growth slowing in recent months. 

However, before pressing the panic button, there are a couple things to bear in mind. The first is that following the incredible growth seen in 2010, there was always going to be a point where the rate of growth slowed down. It was simply never going to be the case that production continued to grow at the rate seen throughout last year; things had to cool down at some point. The second consideration is that machinery output this year is generally still far above where it was last year. In 2011, machinery production will increase beyond the levels seen in 2010 – according to our latest forecast output will grow by 10.2% in 2011. 

If the slowdown means that global machinery production growth falls from 17.2% in 2010 to 10.2% in 2011, then there is an argument that such a slowdown is nothing to worry about. Perhaps a slowdown in growth was inevitable; however, a continuation in the trend would certainly point to a problem down the road. The question that hangs over the economy in general is the same as the one that hangs over the machinery sector: is this slowdown a correction after a steep recovery last year, or is it the start of a more protracted contraction? At the moment we feel the likelihood lies with this being an inevitable settling-down following the terrific growth of last year, but not the start of another down period. Of course, only time will really tell. 

This sentiment is reflected in our machinery production forecasts (graphic below) which are updated on a quarterly basis. 

Graph explaining machinery production growth by region from 2006-2015. Courtesy: IMS Research



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me