Machine vision technologies for photovoltaic soldering

A photovoltaic assembly soldering machine uses machine vision to improve quality and throughput. Machine vision technologies include Cognex In-Sight 5100 intelligent vision system to optimize the process of soldering the cross-links between photovoltaic modules. See related application article.

04/23/2012


In the Mondragon Assembly photovoltaic soldering machine, two induction soldering heads are equipped with the In-Sight 5100 intelligent vision system (one shown) to move over work areas. Courtesy: CognexA photovoltaic assembly soldering machine uses machine vision to improve quality and throughput. Machine vision technologies include a Cognex In-Sight 5100 intelligent vision system to optimize the process of soldering the cross-links between photovoltaic modules.

In-Sight 5100 sets the precise positioning of the soldered joints.

On each side, two induction soldering heads equipped with the In-Sight 5100 intelligent vision system move over the work areas. With machine vision, Mondragon Assembly achieved cycle times of 80 seconds for cells with three busbars and modules with six strings, much faster than manual production.

In addition to the rapid functioning as a stand-alone system, the easy handling of the compact In-Sight 5100 image processing system speeds up the use of the equipment.

Complex applications are solved by powerful vision tools. A wide range of development, management, and monitoring tools is offered by the graphical development platform In-Sight Explorer. Based on the familiar Microsoft Windows environment, it provides for shorter development cycles for vision applications, increased functional reliability, and high system flexibility.

Cognex also offers Mondragon Assembly, a seamlessly integrated global service and logistics network. Cognex’s In-Sight Explorer is easy to use so even less well-trained employees can operate the equipment without knowledge in the field of image processing systems.

In-Sight vision systems can operate as a stand-alone solution, without central control.

See related application article and another photo, “Machine vision cuts PV module assembly time.” The link follows below.

- John Lewis is market development manager, Cognex Corp. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering.

www.cognex.com/in-sight

www.mondragon-assembly.com/photovoltaic-technology/?lang=en



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.