Machine Safety: Wireless and cableless are similar but different
Know the differences, when considering machine safety, between wireless and cableless. As an analogy, is your hand held smart phone, with all its Internet, social media, photograph and movie capabilities, wireless or cableless?
Those involved with machine safety should know the distinctions between wireless and cableless. As an analogy, is your hand held smart phone, with all its Internet, social media, photograph and movie capabilities, wireless or cableless?
In the realm of machine safety, wireless communication and control has advanced significantly over the past few years. It seems just yesterday that an individual with a hand held operator control panel could walk around a robot or a section of a machine to program or modify settings. This hand held operator control panel could send and receive communication and control signals wirelessly but was connected to the robot or machine with a defined length of cable. This cable supplied electrical power to the hand held operator panel and certain actuators on the operator panel were hard wired back to the main control system. These were typically actuators for functions like start, stop or emergency stop. Therefore, this operator panel transmitted and received defined communication and control signals wirelessly, but it was not a cableless operator panel.
Now, fast forward to today. Since the development of safety certified control and communication devices, we now have safety certified wireless capability. Therefore, the control signals that previously required hard wiring via cabling can now be accomplished wirelessly along with the general communication and control. This then only leaves only one requirement for a defined cable and that is to provide electrical power to the hand held operator panel. The developments of battery power and low voltage technology combine to enable a cableless operator panel thereby eliminating the need for any hard connection to robots or machinery. Now the word cableless has meaning as relates to machine control.
Hard wired power cables or not?
So, wireless and cableless are similar because both hand held operator panels are capable of transmitting and receiving signals via wireless technology. They differ because wireless still requires hard wiring for electrical power and this limits its ability to be hand carried beyond the length of its defined cable. Cableless hand held operator panels are no different than your smart phone or Apple iPhone. Cableless operator panels can be carried anywhere. This, of course, creates a whole host of new issues that robot and machine safety standards are addressing.
Do you have machine safety questions related to cableless versus wireless? Do you use a wireless interface integrated with machine safety? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.
Machine Safety: Cableless versus wireless
Cableless (wireless) operator panel applications
How to choose wireless technology for industrial applications
Contact: www.jbtitus.com for “Solutions for Machine Safety.”
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey