Machine Safety: Updating ISO 13849-1 & compliance for robots

On Feb. 7, I wrote a blog titled - ISO 13849-1 compliance is mandatory for robot applications (ANSI/RIA/ISO 10218-1&2: 2011). This particular blog has created a significant amount of feedback, which was my goal.

07/19/2012


On Feb. 7, I wrote a blog titled - ISO 13849-1 compliance is mandatory for robot applications (ANSI/RIA/ISO 10218-1&2: 2011). This particular blog has created a significant amount of feedback and questions, which was my goal.

 

Machine Safety – ISO 13849-1 compliance is mandatory for robot applications (ANSI/RIA/ISO 10218-1&2: 2011)

You see, several colleagues we’re sending me conflicting understandings of the developments within and between the ongoing update cycle for RIA 15.06 and ISO 10218-1:2011. So, my provocative blog stirred a lot of chatter among interested readers and several different interpretations of the developing requirements. I’m bringing this to your attention because several US standards are in update cycles and also dealing with the emergence of ISO 13849-1:2006 with its impact on the functional safety of machinery.

With that said, for robots and their applications, I wish to point you to an article written by the leaders of RIA (Robotics Industries Association) to help readers understand their current position and direction. The article is on page 21 of the June Control Engineering magazine (print and digital versions) and links back to my blog for reference.

In my opinion, they offer a very straight forward explanation of their revision’s current status which should be helpful to us all. Being on several standards committees myself I know that we need to wait for the final version to be published to know for sure what gets finalized. We should also expect several more updates and changes in direction between now and when their update cycle is finalized. Additionally, we standards writers always try to eliminate any and all confusion as any confusion defeats the purpose of a standard. My thanks to RIA, and everyone else, for your very constructive comments.

And, best of luck to the RIA 15.06 working committee with the final revision.

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety - updating ISO 13849-1 compliance for robots.

 

J.B. Titus, CFSERelated articles:

Robotics Industries Association is revising safety standard

ISO 13849-1 compliance is mandatory for robot applications (ANSI/RIA/ISO 10218-1&2: 2011)

EN ISO 13849-1; 2008 – Are We Ready By December 2011?

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me