Machine Safety: Safe enough versus compliance, 8 compliance best practices

How does “safe enough” compare to “compliance”? It doesn't. Not having accidents for a period of time doesn't mean there isn't risk. See these eight machine safety compliance best practices.


With machine safety, how does “safe enough” compare to “compliance”? There's no comparison. The explanation is clearly provided by Bill Hilton, director of health and safety at Georgia-Pacific: “A historical lack of accidents does not imply a current presence of safety. It simply means you’ve been faster than the machine.”

Effectively integrate the pieces to your safety solutions.

Generally the term “safe enough” means: there’s been no risk assessment, no formal hazard mitigation, no thorough safety function evaluation, and probably no effective engineering of a proper safety solution. If this approach isn’t bad enough, don’t count on it to be well documented either.

Eight best practices follow that might help you better achieve “compliance” versus that downward spiral associated with “safe enough.”On the other hand, to be in “compliance” for a given hazard generally means: a current risk assessment is on file, the hazard mitigation process is formalized, there has been a formal safety function evaluation, and the safety solution was effectively engineered. Therefore, all the organizational puzzle pieces are effectively integrated.

1. Have all risks and hazards actually been identified?

2. Do you have copies of all appropriate safety standards?

3. How thoroughly are the identified risk levels defined and scored?

4. How effectively are the identified hazards mitigated?

5. Have you met or exceeded all OSHA regulations and requirements?

6. Have you met or exceeded your company’s safety policy requirements?

7. Is your process effectively documented?

8. Does your safety culture celebrate safety success stories?

Do you have some best practices you could share which elevate your machine safety program to be in compliance?

Do I have them all? would you add a ninth? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety – functional safety & the steps to be compliant in the US.

Updating Minds About Machine Safety

Integrated Safety Systems: Ensuring Safety and Operational Productivity, Aberdeen Group

Machine Safety – the myths of safety cultures.

OSHA – search for near miss

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.