Machine Safety: OSHA’s top 10 cited violations for 2013

Are you very aware of OSHA’s top 10 citations for 2013? Is this because of your excellent safety culture and organizational diligence? Or, is it because you’ve been cited by OSHA?


OSHA top 10 violations for 2013Are you very aware of OSHA’s top 10 citations for 2013? Is this because of your excellent safety culture and organizational diligence? Or, is it because you’ve been cited by OSHA? It seems to me, "Here we go again!"

Does OSHA’s top ten list ever mix it up much at all? I’ve been watching this list fairly close for the past few years, and I can’t overtly state any significant changes. I think these standards move around a little but don’t they all pretty much fall into the top ten year after year?

The preliminary figures for the OSHA FY 2013 Top 10 are:

Standard Total Violations

1. 1926.501 – Fall Protection 8,241

2. 1910.1200 – Hazard Communication 6,156

3. 1926.451 – Scaffolding 5,423

4. 1910.134 – Respiratory Protection 3,879

5. 1910.305 – Electrical, Wiring Methods 3,452

6. 1910.178 – Powered Industrial Trucks 3,340

7. 1926.1053 – Ladders 3,311

8. 1910.147 – Lockout/Tagout 3,254

9. 1910.303 – Electrical, General Requirements 2,745

10. 1910.212 – Machine Guarding 2,701

Courtesy of OSHA: 

In my last few blogs on this subject I’ve indicated that several of these standards relate directly to machine safety, not only item #10 Machine Guarding. In November’s Control Engineering magazine on page 26, a short news article asks: “Were you on the OSHA top 10 list of violations?” The news story goes on to say: “OSHA violations related to machine safety include electrical and wiring methods (5), Lockout/tagout (8), electrical (9), and machine guarding (10)." This mixes the order up a bit, but I recall these same four violations reported in previous years. There were 27,186 total violations in 2012, and 42,502 violations in 2013. So, doubling the number of OSHA reported violations has little direct impact in the types of violations.

My take away is as follows: we’ve still got a lot of work to do if we truly want Machine Safety to not be reported in OSHA’s top 10 list of violations. What is your take away?

Please use these blog posts for advance your machine safety efforts. Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: OSHA Top 10 Violations for 2012


Machine safety pays off – by JB Titus


Machine Safety – does OSHA reference consensus standards for compliance?


Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?


Integrated Safety Systems: Ensuring Safety and Operational Productivity - by the Aberdeen Group


OSHA – search for near miss



Contact: for “Solutions for Machine Safety.”

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
2015 Mid-Year Report: Manufacturing's newest tool: In a digital age, digits will play a key role in the plant of the future; Ethernet certification; Mitigate harmonics; World class maintenance
2015 Lubrication Guide: Green and gold in lubrication: Environmentally friendly fluids and sealing systems offer a new perspective
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Cyber security attack: The threat is real; Hacking O&G control systems: Understanding the cyber risk; The active cyber defense cycle
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths
New industrial buildings: Greener, cleaner, leaner; New building designs for industry; Take a new look at absorption cooling; Offshored jobs start to come back

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.