Machine Safety: One design for OEMs, globally

Can’t original equipment manufacturers (OEMs) have one design for global customers? For at least 15 years we’ve heard about “global harmonization” of machine safety standards. Perhaps OEMs can finally enjoy the economies of scale of one design for global customers?

06/10/2014


Global safety standards would be less puzzling if unified?For at least 15 years in machine safety, we’ve heard about “global harmonization” of machine safety standards. Can original equipment manufacturers (OEMs) finally enjoy the economies of scale of one design for their global customers?

We should probably assume that the autonomous days of years gone by regarding standards and regulation are just that, history. International Standards like IEC and ISO have been emerging and growing in their preference for compliance in many countries. I believe that one reason for this paradigm change, country by country, is because the international consensus standards bodies have been aggressively seeking harmonization. In my experience this harmonization activity has meant that the international standards have been trying to bridge the gaps of country specific standards. Over the past 15 years, I’ve seen representatives from various countries present their argumentation for specific wording in a requirement such that it will cover a unique requirement in their countries.

Take grounding, for example. Grounding to earth can mean one thing to countries like France or Canada and mean something totally different to a country like Netherlands because of differences in the below ground water table. Ambient temperatures will also be very different for control enclosures between Switzerland and Mexico. So, as machine safety consensus standards have harmonized several times over recent update cycles they have become more representative of country specific needs. Having said that, it’s recognized that some countries have established laws related to standards whereas other countries may not. And, some countries (like the United States) have separate regulations like OSHA establishing a legal compliance, which may or may not be tied to their consensus standards.

With all these advancements, considerations and more, can it be argued that we have finally emerged around the globe to a point where OEMs can enjoy the economies of scale of one design for their global customers? One global design for machine safety that can satisfy local compliance requirements? In my opinion, if this can be achieved, accommodating additional regional requirements like the CE Mark will be more easily accomplished from a single base design.

Would unified global safety standards make it easier for OEMs to simplify designs and lower costs? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

See links to these related articles at the bottom of this post.

Machine safety standard merger: One global machine safety standard

Machine Safety: what is the value of ISO 13849-1 for U.S. domestic compliance?

Machine safety compliance - Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety: Who is responsible for international standards?

Contact: www.jbtitus.com for “Solutions for Machine Safety.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me