Machine Safety: Legal advice and safety automation projects

There are steps (or pot holes) for minimizing project-related risks from contract through completion. Safety automation priorities may vary.

09/17/2013


Mark Voigtmann, attorney with Faegre Baker Daniels, Control Engineering author

In the July issue of Control Engineering I read a very interesting article titled; “21 legal takeaways for the automation industry” by Mark Voightmann. This article was very interesting because it’s the first article I’ve read attempting to lay out the steps (or pot holes) for minimizing the project related risks from contract through completion. The automation industry now includes safety automation – so, if safety automation were to be a focus, does it still apply?

Those with machine safety expertise might look at the world a little differently. For example, is a zebra black with white stripes or is it white with black stripes?

From an automation safety point of view, the 21 actionable insights are pretty much on target for safety automation projects. However, for safety automation, I might reorder the steps (or pot holes). For example I’m thinking that the #5 “Limitation of liability” step might be number one or two and that the description / discussion might be edited to be more descriptive of safety hazards.

Likewise, step #7 “Risk should be placed” might also include some language about performing risk assessments as required by standards, OSHA, and local regulations. In addition, I would want CEO’s to be reminded that they have the primary responsibility for conducting risk assessments.

The author, Mark Voigtmann, also refers to a related article, “Legalities: Not all automation standards are equal” from April 2011. I agree that standards can be grouped into four categories; specification standards, industry standards, code standards, and aspirational standards. How many folks know, for example, that NFPA 79 is considered a code standard, which is to say enforceable. That is because several states and municipalities have adopted NFPA 79 as a code for compliance and enforcement. In contrast, the ANSI B11 series of machine tool standards are broadly considered “Industry standards,” which are "highly recommended" for compliance even if they are not specified. Additionally, OSHA does reserve the right to reference ANSI standards in enforcement and citations.

Overall, I have found Mark Voigtmann’s articles to be very informative and insightful. And so far I haven’t found anything more applicable to specifically machine safety automation. Maybe that could be a topic for future coverage.

J.B. Titus, CFSEHas this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

21 legal takeaways for the automation industry

Legalities: Not all automation standards are equal

Legalities: 8 ugly contract clauses



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.