Machine Safety - Hard Guarding Is Best - Right?

While hard guarding can be best for machine safety in some applications, a risk assessment will help assess which technologies should be applied to achieve tolerable risk. This can be where trouble often begins.


We’ve certainly come a long way over the past fifty years regarding machine guarding. Those of us with some grey hair have witnessed the introduction of electrical, electronic, and even software based devices for machine guarding. But hard guards continue to be the base line for “some” regardless of the innovation of technology for safety applications. I recently wrote a blog titled, “Updating Minds About Machine Guarding” to address the adoption of technology issue. However, the central machine safety question still remains:

Hard Guarding Is Best - Right?

Well, quite frankly hard guarding is best some times! A risk assessment will actually help answer this question and the flow charts actually suggest that first steps are to design out known hazards and secondly to apply mechanical guards to achieve tolerable risk. At this point some may say, “job well done”! On the other hand, not so quick, because this is where trouble often begins. A complete risk assessment looks at a machine 24/7. This includes; maintenance, clean-up, set-up, adjustment, clearing, and other operations where hard guards are often removed. In these cases the risk assessment may identify intolerable hazards or risks in these other modes of operations other than production modes. To identify if “other technology” may be needed to provide tolerable guarding 24/7 for your machine a whole new concept may have just entered the room.

The elephant in the room now just may be called “Safety Culture”. Safety Culture will not be found in; industry standards, it’s not covered by the risk assessment, it’s typically not found in the safety policy manual (if there is one), and it’s not taught in the engineering class room. However, it’s what drives the answer to this machine guarding question!

Where do you think the “Safety Culture” elephant in the room comes from or if it even exists?

Submit your ideas, experiences, and challenges on this subject in the comments section below. If your browser doesn't show a comments field, click on this link and scroll down: Machine Safety blog: Hard guarding is best, right?

Also see related articles:

How To Integrate Safety

Updating Minds About Machine Guarding    

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.