Machine Safety: e-stop devices versus safety devices

Safety devices and e-stop machine safety requirements consistently raise questions and merit review. The universal (and global) emergency stop device is not so universally understood. An e-stop is NOT a safeguarding device and certainly an e-stop is NOT a reset button. Review these e-stop device requirements according to machine safety standards.

05/27/2014


Jokab Safety, part of ABB, showed this giant e-stop at a Pack Expo show.Use of e-stops in machine design is one of those things that frequently suggests a refresher understanding might be helpful. The universal (and global) emergency stop device is not so universally understood. An e-stop is NOT a re-set button. So far I have not encountered anyone in industry who ever have considered an emergency stop device as a re-set button. [Some days, I wonder.]

An emergency stop device is well defined as a red button on a yellow background. The time has come again to touch on e-stop device classification according to industry machine safety standards.

In the United States there are two primary machine safety standards that call out requirements for emergency stop devices and their stopping functions. They are ANSI B11.19; 2010 and NFPA 79; 2012. ANSI B11.19, Performance Criteria for Safeguarding in clause 12.9, page 73 reads as follows:

12.9 Emergency stop devices

"Emergency stop devices are not safeguarding devices. They are complementary to the guards, safeguarding devices, awareness barriers, signals and signs, safeguarding methods and safeguarding procedures...."

Types of devices usually covered by the safety standards and used for the emergency stop function can include, but are not limited to, the following:

• Pushbutton-operated devices

• Rope pull (cable pull) operated devices

• Foot-operated device without a mechanical guard

• Disconnect switch actuator

• Rod-operated device

• Push-bar-operated device 

Furthermore, the actuators of emergency stop devices are required to be colored RED, and the background immediately around the actuators are required to be colored YELLOW. This distinctive color combination is globally reserved for emergency stopping devices. NFPA 79, Electrical Standard for Industrial Machinery, also covers the information and requirements listed above along with several international IEC and ISO machine safety standards.

As I’ve discussed this question with other industry experts, in my opinion, the consensus is that safeguarding devices are always exclusively used to achieve a dedicated safety related function. Emergency stopping devices are not considered safeguarding devices because they are complementary devices and because they are not exclusively used to achieve a safety related function.

Please add your comments to this narrative either supporting or dissenting. Add your comments, thoughts, ideas, experiences, and challenges in the comments section below.

Related articles linked at the bottom of this post:

E-Stops aren’t safety devices

Machine Safety: Thinking of bypassing an e-stop? Have you talked to an attorney?

Machine Safety: My main disconnect e-stop isn’t red with a yellow background

Not again – E-Stops do not equal machine safety

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me