Machine Safety: Does multitasking provide an effective illusion of safety?

Is it possible to have everyone’s safety behavior in the factory exactly as it should be 24/7 without exception? Can safety performance always be at its peak? Are we capable of safe multitasking?

12/14/2012


This Lockout Center board is used at the Yaskawa America Oak Creek, Wis., plant. CFE Media photo: Mark T. HoskeImagine – everyone’s safety behavior in the factory is spot on 24/7 without exception and safety performance is at its peak. Is this an illusion or is it real?

 

In my opinion its best to look at this question first by ruling out what doesn’t apply to this assessment. By this statement I’m talking about the golden “Hierarchy of Measures” for risk reduction. In review, they are:

 

1) Eliminate the hazard – design it out

2) Isolate the hazard with hard guarding

3) Add additional engineering, guards, devices, or layers of safety

4) Administrative controls like – training, signage, assessments, etc.

5) Personal protective equipment (PPE) like - goggles, gloves, outer clothing, shields, etc.

 

Assuming that all hazards have been identified we can probably say that Measures 1, 2 and 3 have been applied as appropriate reducing those hazards to acceptable levels. With that said we can also say that Measures 4 and 5 and any residual risks are then subject to behavior related solutions for risk reduction. Multitasking is definitely a human behavior. So, this discussion should only concern human behavior, right?

 

Well, not so fast. The reason for pausing is to first acknowledge that the concurrent performance of several tasks has also been a focused capability of computer type processes. However, we will rule computer type systems out of this discussion for now because their designs, applications and performance for performing safety functions are thoroughly covered via international and domestic standards. On the other hand, human behavior safety practices are mostly addressed via procedures and training. Safety solutions based on procedures and training are largely based on single tasking human behavior. But, this is where the precise risk level scoring approaches begin to get murky.

 

At this point our friends the cognitive psychologists enter the room where they begin describing two very different forms of human behavior – the automatic process versus the controlled process. It seems we humans have tremendous capabilities to multitask two or more automatic processes or an automatic process with a controlled process. Some humans are even capable of multitasking two controlled processes but generally not very well. So what are these two kinds of processes?

 

Automatic process examples include; smoking a cigarette, drinking water, listening to music, or walking. Controlled process examples include; driving through traffic, climbing a ladder, or having a conversation. Many of us have had the experience of getting lost in a conversation and realizing that you’ve been daydreaming or visibly distracted. This is an example of multitasking in a controlled process and an automatic process according to psychologists.

 

Now, think of an example where someone in a factory setting has been injured. Possibly a technician was trouble shooting an electrical connection without following the required lockout/tagout procedure to save time. And, perhaps the technician was injured because he was multitasking performing a controlled process while he was involved in an automatic process of thinking about the argument he just finished with his supervisor.

 

When there’s no accident or injury is the completion of a task an illusion of safety?

 

J.B. Titus, CFSEYour comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below.

 

Related articles:

Machine Guarding & The Hierarchy of Measures for Hazard Mitigation

Machine Safety: System degradation and incidence of injury

Machine safety: DANGER: Machine without brain requires yours!

Machine Safety Culture – compliance versus cooperation driven.

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me