Machine Safety: consensus standards and OSHA compliance
In our plant we comply 100% with the OSHA regulations of 29 CFR 1910.xxx for machine guarding and personnel safety. Accordingly, OSHA would have no grounds to cite us for violations, right?
Hey, in our plant we comply 100% with the OSHA regulations of 29 CFR 1910.xxx for machine guarding and personnel safety. Accordingly, OSHA would have no grounds to cite us for violations – right?
In fact, there is no guarantee! Here’s why in my opinion:
OSHA openly considers their regulations to be the law and they frequently use the term “de minimis” which is to say “the bare minimum.” Because of this situation they also acknowledge that their regulations are mostly 30 to 40 years dated and that certain consensus standards represent state-of-the-art machine guarding thinking. Understanding that, OSHA has the capability to step beyond its own regulations in two important ways:
a. “Incorporation by Reference” is specifically listed by OSHA at 29 CFR 1910.6 where they list over 100 “incorporated by reference” consensus standards. Some of these consensus standards are also fairly old. However, they have been ruled to be enforceable as OSHA regulations.
b. OSHA reserves the right to issue citations for violations under the General Duty Clause [(5) (a) (1)] and referencing consensus standards evidencing that certain hazard(s) are present and that there are various means available to mitigate those hazard(s). Since consensus standards have update cycles generally of every three to five years many of these standards have added the risk assessment requirement (hazard identification) and mitigation steps for reducing the identified hazards. Therefore, in my opinion the General Duty Clause has grown in strength over the past ten years regarding OSHA’s ability to use this Clause for enforcement of violations.
It would be very interesting to see how active OSHA has been over the past 10 years using the “Incorporation by Reference” and/or the “General Duty Clause” as tools for citing violations under their enforcement capability. Please let us know if you’ve seen or heard of this activity in industry. If you do respond, please do not include any confidential information or company names.
Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: consensus standards and OSHA compliance.
OSHA regulations of 29 CFR 1910.xxx
“Incorporation by Reference” - 29 CFR 1910.6
OSHA’s - General Duty Clause [(5) (a) (1)]
Contact: www.jbtitus.com for “Solutions for Machine Safety”.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
- CFE Edu
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey