Machine Safety - Cableless vs Wireless

03/15/2010


Machine Safety and “cableless” vs “wireless” has been an ongoing discussion over the past two years as this technology rapidly travels through its evolution cycles to the plant floor. Personally, I’ve sat in a dozen discussions over these two terms and how to choose a word that best describes the application as well as the issues. To wrestle this one to the ground it’s my recommendation that we choose an application like - cableless pendant control. Now, let’s discuss these two terms and which one best fits the application.

The application is a hand held pendant operator station which means it functions like an operator station and it’s portable. Since it is portable and cableless that means that it has its own power supply and that the communication signals for control are not cabled back to a panel. Therefore, the communication signals are wireless. If this particular pendant operator station also includes safety functions like emergency stop then the safety-related communication signals are likewise wireless. So, is this particular application and device “cableless” or “wireless”?

In my opinion the answer is “cableless”! The reason is that wireless in this case is a more generic term and it only describes the type of control communication technology. Being generic, this term can also apply to wireless - sensors, controllers, monitors, switches, etc. which can all be rigidly mounted and cabled for power. Since a cableless operator control station also includes its own power supply (like a battery), there are no cables for power or control. Therefore, this application in my opinion should be considered a “cableless” application which sometimes can also have safety-related functions. This understanding is critical to the safety standards community because it directly impacts the application requirements that must be addressed by the standard.

Some of the application issues include; audible and/or visual signs to show active status, possible out of sight storage when not in use, zone control (yes or no), what happens if there’s a loss of signal or power, can the panel stay active if a docking station is provided, to mention a few.  Many of these application issues do not need to be addressed if the application is only wireless and not portable. I advise that a thorough risk analysis of your application issues is essential in considering this technology around your machine.

For more on Machine Safety visit: www.jbtitus.com

Posted by J.B. Titus on March 15, 2010



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me