Machine production set to rebound

IMS Research's report indicates machinery production revenues are expected to rebound in 2011 and continue to grow through 2014.

11/20/2011


This is set to be a record year for worldwide machinery production, recording aggregate 10.2 percentage growth, according to IMS Research. The report titled, “Machine Production Yearbook – 2011” further points to the fact that this trend is expected to continue through the forecast period to 2014.

The machine sector was amongst the hardest hit by the economic downturn, and given the long-lead nature of the business – it was also one of the last to suffer. However, according to the latest report from IMS Research, worldwide production of machinery is set to eclipse its previous record, set back in 2008.

“The latest indicators are that growth is slowing slightly from the highs seen last year – hardly surprising when you consider the magnitude of the bounce back seen in 2010 – but there still appears to be solid growth on last year. This should of course be encouraging news, however, when output is considered on a regional basis, the contrast is striking,” says Andrew Robertson, Market Analyst, IMS Research.

Output from Asia-Pacific declined in 2009, but not to the extent as in Europe and the Americas; and whilst Japan’s output plunged in 2009, China and India continued to see growth. But helped by tremendous growth in Japan in 2010, Asia Pacific comfortably surpassed its 2008 levels last year, and looks set to continue its strong performance.

In the Americas, where machinery output is still dominated by North America, the decline in 2009 was more severe, and the subsequent recovery more gradual. That said, the recovery has been such that 2011 is predicted to be a record year for machinery production.

Meanwhile, the 2009 downturn in Europe was more severe than in the other two regions, and recovery has been more varied. Although Germany’s upturn has been fairly strong, the plight of others such as Spain, Greece and Portugal has been widely documented. As such, IMS Research does not anticipate that machinery production in Europe will surpass the pre-recession level until after next year.

The figure below illustrates the varying performance of the three nations which have traditionally dominated the machinery sector. Whereas machinery production in Germany and the US recovers to set record-breaking years relatively quickly after the downturn, the outlook in Japan is in stark contrast.

Graph explaining current and projected revenues for machinery production in the U.S., Germany, and Japan, three of the biggest manufacturing countries in the world. Courtesy: IMS Research

The Japanese industry plummeted in 2009, and at present the outlook is still uncertain. As such, even with growth in 2010 of almost 40 percent, production is still not expected to recover to pre-recession levels before 2015.

“Although no industry is immune from the effects of the current economic uncertainty, machinery output, for the time being at least, appears to be faring better than the markets and economy in general. Whether it will continue to do so is yet to be seen,” Robertson adds.

www.imsresearch.com 

IMS Research

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me