Machine Guarding: Tolerable vs residual risk

Why do so many colleagues in manufacturing choose to avoid the terms – tolerable risk and residual risk? If there’s one thing “integrated safety systems” and requirements for risk assessments have brought to the industrial forefront over the past ten years – it’s risk awareness. It’s now “OK” in conversation and correspondence within companies to use words like; risk, safety, mitigation, hazard, and consequences – all in one paragraph.

11/11/2011


JB Titus, CFSEWhy do so many colleagues in manufacturing choose to avoid the terms – tolerable risk and residual risk? If there’s one thing “integrated safety systems” and requirements for risk assessments have brought to the industrial forefront over the past ten years – it’s risk awareness. It’s now “OK” in conversation and correspondence within companies to use words like; risk, safety, mitigation, hazard, and consequences – all in one paragraph.

    So, is there any difference between “tolerable risk” and “residual risk”?

    In my opinion, yes! First, let’s start with residual risk. Residual risk is defined by ANSI B11 – 2008 (General Safety Requirements Common to ANSI B11 Machines) as; “risk remaining after protective measures (risk reduction measures) have been taken”. Furthermore, a commonly understood fact is that there will always be some level of residual risk for a given hazard after all risk reduction measures have been applied. In other words, residual risk will never equal zero. Let’s draw this machine safety an analogy with everyday life. Almost daily we get into our automobile and drive some distance to go to the store, work, school, etc. and we have experienced the residual risk associated with this experience. Many risk reduction measures have been applied by; the automobile manufacturer, the State Department of Transportation, the highway developer, the licensing department, etc. and the local police department is the enforcement agency. Therefore, everyone in the automobile has understood the residual risk associated with this experience acknowledging that there still is some risk which means it cannot equal zero.

    Now, what is tolerable risk? Tolerable risk is defined by ANSI B11 – 2008 as; “risk that is accepted for a given task (hazard situation) or hazard. For the purpose of this standard the terms “acceptable risk” and “tolerable risk” are synonymous”. The standard goes on to say that; “The expression “acceptable risk” refers to the level at which further risk reduction will not result in significant reduction of risk; or additional expenditure of resources will not result in significant advantages of increased safety”. In my opinion, this definition means that all risk reduction measures have been taken to mitigate the given hazard in order to reduce the risk to a tolerable risk level. My experience is that various companies define tolerable risk levels which are indigenous to; their industry, their business model, the individual hazard, the competency level of employees they are able to hire, the level of local enforcement, and so forth. It’s sort of like the difference in driving a car in Lexington, Kentucky versus Mumbai, India. I would very likely define my level of tolerable risk very differently in Mumbai to the point that I probably would not even attempt to drive an automobile.

     Now, is it possible that residual risk and tolerable risk may equal the same level? Of course! However, they are very different in my opinion because of different definitions and because their approaches are very different.

    What is your opinion?

    Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Guarding: Tolerable vs residual risk.

    Related articles:

Residual Risk Is Alive & Ever Present

Machine safety pays off

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me