M12 and 7/8-in power connectors accept larger wires
New offering from Binder-USA allows connectors to use larger wire gauge (up to 14 AWG) and conduct currents up to 8 A and 12 A per contact.
Binder-USA is now offering M12 and 7/8-in. field-attachable connectors with larger screw clamp terminations. This change will allow the connectors to accept wires up to 14 AWG. The ability to use a larger wire gauge make the connectors suitable for connecting power applications typically found in industrial environments.
The Series 713 M12 connectors with 4- and 5-pins can now be terminated with 16 AWG wires and a maximum cable diameter of 10 mm. After increasing the wire gauge it is possible for the connectors to conduct currents up to 8 A per contact. Both male and female versions are available in straight form and are intermateable with all 4- and 5-pin A-coded versions.
The Series 820 7/8-in. connectors with 5-pins can now be terminated with 14 AWG wires and a maximum cable diameter of 14 mm. By increasing the size of the cable clamps it is now possible for the connectors to withstand currents up to 12 A per contact. Male and female connectors with straight and angled forms are available with the larger screw terminations.
All Binder M12 and 7/8-inch connectors are IP67 rated when connected to their mating parts. Binder-USA offers mating cordsets, receptacles and field-attachable connectors for a complete connecting system.
For more information visit: http://www.binder-usa.com/press/?p=258
-Edited by Kelsey Kirkley, Control Engineering, www.controleng.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.