Lunchtime project for automation and control engineers

This LeaveMeAloneBox is made of LEGOS. Making one of these (Legos or otherwise) might be a fun lunchtime project for automation and control engineers... before next Halloween? See video.

11/14/2010


Clockwork LEGO LeaveMeAloneBox, a good for-fun automation project?I saw one of these years ago, around Halloween, on the receptionist's desk at a company I was visiting.  There it was, a tiny shiny black plastic box, not connected to anything.  The unmarked toggle switch was inviting just anyone to flip the switch.  The receptionist was pretending that she did not notice the torment that the presence of the box was causing each of us.

What was the purpose of this box?  Why is the switch unmarked?  Why is it sitting out where just anyone waiting in the lobby could flip the switch? Was it safe to do that?  Who put it there?  Is it a toy?  Is it a Halloween prank?  Who among us is bold enough to just flip the switch and see what happens?

While the debate continued in each of our heads, one among us stepped up to the receptionist’s desk and flipped the switch.  She looked up from her work and smiled so it must have been OK.  The box made the sound of a small high-speed motor and gear train at work, it rumbled a bit and then part of the box opened slowly and a plastic doll arm slowly reached out toward the switch.  By that time we were all crowded around the machine watching it intently as the hand slowly returned the toggle switch to the off position...  then suddenly snapped shut. 

Since everything up until that point had been in slow motion, its sudden rapid movement and loud sound as it snapped shut startled all of us enough that we each made a small jump back from the machine. 

Over the years, I have searched novelty shops for one of these and not found one.

Now through the wonder of the Internet I have discovered a wealth of information about "LeaveMeAloneBoxes.”  Maybe you would be up to the challenge of building one of these yourself - to amaze and astound your friends and co-workers?

Ever see one of these? Send me a photo of yours, and some info, if you build one.

Leave a comment about the LeaveMeAloneBox below - click the link if you don't see the comment area.

GO ROBOTS !

Paul F. Grayson - Chief Engineer, AMERICAN INDUSTRIAL MAGIC, LLC

"Small engine and machinery repair" TC TINKERS 4-H ROBOT CLUB

"Science, Engineering, and Technology" 390 4-Mile Rd. S., Traverse City, MI 49685

pgrayson@aimagic.org AIM: aimagic.org

TC Tinkers 4-H Robot Club: http://tech.groups.yahoo.com/group/TC_TINKERS_4-H_Robot_Club/

Control Engineering blogs www.controleng.com/blogs

Free 4-H club news letter: http://groups.yahoo.com/group/TC_TINKERS_4-H_Robot_Club/join



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me