Logistics show to co-locate with Hannover Messe in 2018

CeMAT Show to expand reach of even-year trade event in Germany.

06/02/2016


In 2018, the global logistics show CeMAT will co-locate with Hannover Messe to create an international trade event that will feature manufacturing and supply chain logistics. Image courtesy: Hannover Messe.After the success of the 2016 Hannover Messe, trade show officials have expanded the reach of the world's largest industrial trade show.

In even-numbered show years beginning in 2018, Hannover Messe will be co-located with CeMAT, the industrial logistics and supply main management show also produced by parent company Deutsche Messe. The 2018 show will be April 23-27 in Hannover, Germany, and the 2017 Hannover Messe will be held April 24-28. CFE Media is a media partner with Hannover Messe.

In odd-numbered years, Hannover Messe includes its Motion, Drives, and Automation (MDA) pavilions at the show. Those shows tend to have more attendance than the even-numbered years, but attendance was up more than 20% for the 2016 Hannover Messe that included the United States as a Partner Country. "Intelligent intralogistics is the backbone and enabler of Industrie 4.0. It therefore ties in very closely with the Industrial Automation and Digital Factory themes covered by Hannover Messe. And that is why we will be running CeMAT alongside Hannover Messe, starting in 2018," said Dr. Andreas Gruchow as the Deutsche Messe Managing Board member in charge of CeMAT. "This will create a truly unique platform for Industrie 4.0. The synergies are obvious. Staged conveniently at the same time and place, the two shows will cover Industrie 4.0 themes in greater depth and with greater breadth than any other event worldwide." "Intralogistics has a relevance that extends far beyond warehousing and distribution and into manufacturing and assembly," said Christoph Beumer, Chairman of the CeMAT executive committee and managing director of Beumer Group GmbH & Co.

"Intralogistics systems very often control value-added services; they stock and unload assembly lines; and they enable manufacturers to pre-sell products before they even make it off the line and into the warehouse. Intralogistics makes it possible to process short production runs and one-off production jobs cost-effectively and is therefore integral to Industrie 4.0. For these reasons, it makes eminent sense to further expand CeMAT's sharply defined profile and leverage synergies with Hannover Messe."



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me