Literature Offers


Cooling and drying

Solutions to industrial cooling, drying, conveying, blowoff, cleaning, and static electricity problems are offered in a 96-p technical guide, which features technical explanations, performance data, photos, and drawings for each product.

Exair Corporation

Write 316 on PE card

Gas boosters

Accessories for liquid pumps, gas boosters, and air amplifiers are presented, including air pilot switches, high pressure relief valves, pump cycle counters, air receiver tanks, and air control packages. The accessories are ideal for use with MAXIMATOR products.


Write 317 on PE card

Tools and equipment

A Master Sourcebook for 2002 features thousands of products throughout the 316-p catalog. Tools kits, carts and cases, test equipment, hand and power tools, and wire/cable and fiber optics are among the items offered.

Jensen Tools

Write 318 on PE card

Pressure and flow

Controlcat New Horizons in Pressure, Flow & Everything Else covers a variety of USA-made products, including conductivity and dissolved oxygen meters, controllers and transmitters, flow meters, signal conditioners, and switches. Forty-eight Dilbert cartoons are contained within the catalog.

Omega Engineering, Inc.

Write 319 on PE card


The benefits and features of DiamondShield electrical enclosures are detailed in a brochure. The 10-product enclosure family is made of cost-effective fiberglass and is available in 150 configurations.

Stahlin Non-Metallic Enclosures

Write 320 on PE card

Exhaust systems

A line of corrosion-resistant polyvinyl chloride, chlorinated polyvinyl chloride, and polypropylene fume exhaust systems and duct fittings is highlighted in a 28-product brochure. Factory Mutual and Underwriter Laboratories data are included.


Write 321 on PE card

Load cells

Load Cell Guide #14 is a comprehensive catalog of strain gauge technology and features a large selection of load cells, weigh modules, sensors, and scale accessories. More than 30,000 in-stock products are available with same-day shipping.

Rice Lake Weighing Systems

Write 322 on PE card


This catalog discusses a line of AC- and DC-operated linear and rotary position sensors and support electronics and offers easy reference with photos and specifications.

Macro Sensors

Write 323 on PE card


Guide to high-pressure, high-volume industrial pumps focuses on the Hydra-Cell D-15 and D-17 series and discusses product features, specifications, ordering information, and application examples.

Hydra-Cell Industrial Pumps Wanner Engineering, Inc.

Write 324 on PE card

Roof systems

A package of literature dedicated to SPF Roof Systems is available with information on design, components, applications, installation, and case histories. SPF roofs are used for both new construction and re-roofing projects.

BASF Corporation

Write 325 on PE card


A 2002 modified bitumen roofing catalog takes a look at a complete line of engineered systems, including granule-surfaced Paradiene and foil-faced Veral systems. The Siplast Certificate of Analysis Program is also explained in the literature.


Write 326 on PE card

Component fastening

A 96-p catalog makes fastening rotating components to shafts easier. Fairloc is designed to solve phasing, timing, positioning, and frequent removal problems that other methods can't properly handle.

Stock Drive Products/Sterling Instrument

Write 327 on PE card

Gas monitoring

The 2002 Haloguard Refrigerant Gas Monitor Product Guide instrument and accessory catalog gives descriptions and specifications for models that meet a range of monitoring requirements, including stringent refrigerant gas conservation and basic safety applications.

Thermal Gas Systems

Write 328 on PE card


Photographs, descriptions, and specifications for a complete line of Wright tools are contained in a 75th anniversary product catalog. Thirty additional pages of new products are featured in the 2002 version.

Wright Tool

Write 329 on PE card

Vacuum generators

A new version of the single and multi-venturi vacuum generator catalog includes a technical engineering section and an accessory section. Gast venturi vacuum generators have flow ranges from .2 cfm to 158 cfm and maximum vacuum from 7.5 to 27'' Hg.

Gast Manufacturing, Inc.

Write 330 on PE card

Commerical products

The 2002 Commercial Products Catalog provides information and specifications on roof scuttles, automatic fire vents, floor, vault and sidewalk doors, and LadderUP safety posts.

Bilco Company

Write 331 on PE card


A complete package of industrial lubricants and services known as the Dow Corning Fluid Consolidation Program is described in a 4-p brochure. The program aims to reduce maintenance costs and extend equipment life.

Dow Corning\iam

Write 332 on PE card

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me