Linear motors in a Catch-22 market

The linear motor market is set for a recovery, but the recovery may lead to yet another downturn by the end of 2012.

02/06/2012


IMS Research has been monitoring the market for linear motors since 2001 and has been producing Worldwide Market Statistics since 2004. In that time myself and colleagues who have followed the peaks and troughs of the market have listened to executives from linear motor manufacturers tell of their quest to kick their dependence on four key machinery sectors.

The four key industry sectors in question, namely semiconductor machinery, machine tools, electronics and electronics assembly machinery and flat panel machinery, collectively accounted for an estimated 62% of market revenues in 2010. Because of the highly cyclical nature of these sectors, the market for linear motors has been on a rollercoaster of a ride in recent years. As shown below, stable double digit growth in 2007 and 2008 was followed by a fall of over 30% in 2009 and then booming market conditions in 2010, as all four key machinery sectors recovered simultaneously from the downturn. At the end of 2011 growth in these sectors slowed, which in turn depressed the market for linear motors. The figure below demonstrates the alignment between the markets of four key machinery sectors and the linear motor market. 

Graph showing the worldwide market for linear motors and machinery sectors influencing the linear motor market. Courtesy: IMS Research

Manufacturers of linear motors crave markets that have stable revenue growth, such as materials handling, packaging machinery, food and beverage machinery and medical sectors. So why are linear motors so successful in penetrating the four key machinery sectors, but find it difficult to target machinery sectors with stable growth?

Linear motors operate at higher speeds, offer faster acceleration and greater precision than established fluid or electromechanical linear drive technologies, but cost considerably more. The purchase of new machinery is often an investment decision, based on the initial purchase cost and lifetime costs of the machine weighed against the payback of the machine’s production. If a higher throughput or productivity can be achieved, then the initial investment will be recouped quicker. Thus a customer, investing millions of dollars in machine-tool or semiconductor production machinery, will pay a premium for high precision fast linear motor actuation which will increase the machine’s throughput and precision. However, a customer investing less than $50,000 in a materials handling machine that does not need high precision may not consider the higher throughput to be worth the additional cost of a linear motor.

Linear motors are expensive to produce because of labour intensive methods associated with low volume production, cost of production will not fall until sales volumes increase and production can be automated. The other significant cost element of linear motors is magnets. In 2011 increases in rare earth magnet costs caused linear motor manufacturers to raise prices by as much as 20%.

So the catch is markets with stable revenue streams will not use linear motors until the prices come down, and the prices won’t come down until volumes increase. The volatile machinery markets linear motors currently serve have a dive in volumes every few years, couple this with the increased prices in 2011 means that the current flat bed and U-channel design of linear motors won’t penetrate markets with stable revenue growth any time soon. As Yossarian observed, that’s some catch, that’s Catch-22. 

Is there a way out of Catch-22?

Linear motor manufacturers who wish to compete in industrial sectors which do not place such a high value on speed and precision will need to develop low cost motor designs. Cylinder, or tubular linear motors are one low cost design solution and are produced by companies such as Lin-Mot and Dunkermotoren’s newly acquired linear motor business from Copley Controls

The current market slowdown may create other design solutions. During the last downturn in 2009, linear motor manufacturers undertook development work on behalf of machine builders to produce linear motor drives as options to electromechanical linear motion drives.

Linear motor manufacturers should take the opportunity of a fallow period to develop their technology further. In 2012 manufacturers of linear motors should seek to mitigate the effect of increased magnet prices by pursuing design changes. For example, at the recent SPS/IPC/Drives trade show in Nuremberg, Tecnotion - a manufacturer of linear motors based in the Netherlands - was displaying a linear motor which uses a floating magnet and coil track, instead of a coil unit over a magnetic track. This would reduce the amount of rare earth material required to produce a linear motor.

Market Recovery

Profile photo of James Dawson, a senior analyst for IMS Research who specializes in the field of power transmission. Courtesy: IMS ResearchThe 2010 recovery in the market for linear motors from the previous downturn was led by an upturn in demand for semiconductor and LED machinery, then machine tools and finally the reinstatement of projects which were suspended due to the 2008 credit crunch. A milder version of this cycle is forecast to repeat itself from the end of 2012, with an upturn in industrial production in 2013 and 2014 driving an expansion of demand for machine tools and other industrial machinery sectors. If the market for linear motors is to prevent another dive in 2015/2016, it will need to finally penetrate new markets.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.