Lighting efficiency improvements proposed for ASHRAE 90.1

Proposed changes to ASHRAE 90.1 will require automatic lighting controls in more space types and shorten the times before lighting is automatically reduced or shut off.

02/22/2013


Addendum by to ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, was developed in response to requests from the design community, which asked for a tabular structure for specifying the controls requirements. By putting these requirements into an easier-to-use tabular format, the provisions will be clearer, more likely to be complied with and easier to enforce, according to Eric Richman, chair of the standard’s lighting subcommittee.

“The proposed addendum is the product of both the interest in increasing lighting controls use where practical and simplifying the standard,” Richman said.

The 2010 version of the standard includes basic shutoff and occupancy sensor type controls in selected spaces. The addendum will increase the use of occupancy based control to all spaces in a building where practical. At the same time, additional partial on and partial off controls are added to further reduce full on lighting when spaces are typically unoccupied. For example, many spaces that are not always practical applications for full automatic off (such as corridors) would require at least partial automatic off when the space is unoccupied.

The new tabular format allows users to see all requirements for most interior space types and categories in one simple look-up table.

“This new representation and update of control requirements will reduce the time that lighting is on at full levels in many spaces and make the requirements easier to understand and therefore comply with and inspect to,” he said. “Both of these conditions will improve energy efficiency of the building.”

The addendum is open for public review till April 1, 2013. For more information, visit www.ashrae.org/publicreviews.

Also open for public review is addendum ay till March 17, 2013. The proposed addendum corrects a couple of small editorial issues and raises the threshold for when daylight responsive controls are required so that they are cost effective in all climate zones.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me