Learning: Scholarship, research, lectures, online tools, tours help fill engineering skills gap

Helping to fill the engineering skills gap a new partnership between the University of Virginia and a Fortune 500 company promises benefits including technology related scholarships, research and free lectures. Separately Glatfelter presents a 20-minute online mill tour work processes and related controls, and live plant tours start tomorrow via Advanced Technology Services.

10/06/2008


Charlottesville, VA and York, PA — Among recent efforts to fill the skills gap in science, technology, engineering, and math (STEM) are a new partnership between the University of Virginia and a Fortune 500 company promises benefits including technology related scholarships, research and free lectures. Separately Glatfelter presents a 20-minute online mill tour,


Glatfelter launches its first Interactive Mill Tour showing how renewable wood resources are used

The University of Virginia Engineering School is partnering with Science Applications International Corp. (SAIC) to support programs and research. The University of Virginia's School of Engineering and Applied Science has strengthened its relationship with the Fortune 500 company with a five-year master research agreement to support a collaborative, cyber-security speaker series co-hosted by the Engineering School. SAIC, a San Diego-based scientific, engineering and technology applications company, will provide funding for student research projects and scholarships for SAIC employees.
The first lecture on cyber conflict, cyber deterrence, and imperatives in national cyber security was presented last week by Robert J. Giesler, SAIC's vice president for cyber programs in the Mechanical Engineering building on the University grounds. The free lectures are open to the public.
The alliance is mutually beneficial according to Dean James H. Aylor, supporting the university’s educational programs, research, and technology transfer efforts. SAIC says it will benefit from being on the radar of qualified engineering graduates and from access to commercially viable research.
"Maintaining strong ties to universities is important for a science-and-technology based company like SAIC," said John Thomas, SAIC senior vice president and business unit general manager. "We see the pursuit of joint research and educational initiatives as highly important in meeting future challenges in business and technology.”
SAIC, with approximately 44,000 employees, works to solve problems in national security, energy and the environment, critical infrastructure, and health. One of its major units, the Cyber Program Management Office, is based in McLean, VA. Its clients include the U.S. Department of Defense, the intelligence community, the Department of Homeland Security, other U.S. government civil agencies and selected commercial markets.
The master research agreement, a keystone of the alliance will enable prompt funding of research over a five-year period. With the agreement in place, the school will be able to more easily roll out faculty projects, including wireless technology and data mining research.


Research money, scholarships, and lectures are among ways to promote engineering.

SAIC will offer research stipends from $5,000 to $20,000 to fund graduate or undergraduate student projects. The money will support research that addresses technical challenges and issues of interest to SAIC and its customers, including cyber security, knowledge management, and large data networks.

The Engineering School plans to host a cyber-security lecture series to serve as an educational experience for students, faculty, and SAIC employees. This will involve faculty traveling to SAIC in McLean for four lectures and SAIC employees coming to the school for an additional four lectures. Select SAIC employees will receive scholarships for the 18 months of the University’s Systems Engineering Accelerated Masters Program, a high-intensity program that readies graduates for consulting positions that fit the SAIC business model.

Virtual tours: Interactive mill tour (see site image near top of page)

Glatfelter launches its first Interactive Mill Tour on the company Website. It's not often that one has a chance to take a personally-guided, behind-the-scenes tour to see how renewable wood resources are used to make paper for books, stamps, envelopes, greeting cards, carbonless forms, and specialty products.
The tour brings Glatfelter's Spring Grove, PA and Chillicothe, OH, paper mills to life through rich illustrations, photography, video, and detailed animation. Viewers are led through two fully integrated Kraft pulp and paper mills on a 20-minute journey that begins with a tree and ends with the finished paper product.

Viewers will learn how Glatfelter manages its environmental footprint by practicing sustainable forestry, making use of biomass for fuels, utilizing green chemistry to help improve the efficiency of its pulp-bleaching process, and achieving chain-of-custody triple forestry certifications (FSC, SFI, PEFC) at both its North American facilities. The video tour, available on CD, can be viewed in its entirety or in shorter segments and is suitable for training and educational seminars. A CD-ROM is available.

Actual tours: See plants across America this month,
Advanced Technology Services Inc. (ATS) an "up close" look at ATS' maintenance programs in action. Attendees will witness first hand the strategic advantage that comes from a targeted maintenance program. ATS pioneered the factory asset maintenance business over 20 years ago. 

ATS says the tour couldn't be timelier, given the current economic environment. In a Nielsen Research survey conducted of 100 U.S. senior manufacturing executives with titles of CEO, CIO, vice president and plant manager, two-thirds said they would outsource maintenance as a hedge against a downturn in the economy.from ATS, they have dramatically reduced downtime. Manufacturers say downtime is expensive, costing an average $22,000 per minute, as much as $31 million daily, when production stops. 

October 2008 tour dates and hosts include ...
Oct. 7, 2008– Honda Manufacturing of Alabama – Lincoln, AL;
Oct. 8– Caterpillar – Nuevo Laredo, Mexico; 
Oct. 15– MasterBrand Cabinets– Littlestown, PA; 
Oct. 16– Eaton Electrical – Greenwood, SC; and 
Oct. 29– Service Heat Treating – Milwaukee, WI

Trade shows and conferences also offer learning opportunties. Control Engineering provides an automation event calendar with links .

Also read a Control Engineering article about closing the engineering skills gap

Mark T. Hoske, editor in chief, and Control Engineering News Desk
Register here and scroll down to select your choice of eNewsletters free.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.