Japanese research satellite to use magnetic read only memory (MRAM) to hunt sprites in the upper-atmosphere

Sprites, the somewhat whimsical name given to complex upper-atmosphere optical flashes known as transient luminous events (TLE), were first photographed by Space Shuttle astronauts on Oct. 21, 1989, although apocryphal sightings by military and commercial pilots had been reported earlier. Scientific understanding of these short-lived electrical phenomena, however, is practically nil.

03/01/2008


Sprites, the somewhat whimsical name given to complex upper-atmosphere optical flashes known as transient luminous events (TLE), were first photographed by Space Shuttle astronauts on Oct. 21, 1989, although apocryphal sightings by military and commercial pilots had been reported earlier. Scientific understanding of these short-lived electrical phenomena, however, is practically nil.

Scientists at Tohoku University in Sendai, Miyagi Prefecture, Japan led by Prof. Yoshida Kazuya plan to change that by launching a satellite called SpriteSat. The spacecraft is one of six small satellites to be launched aboard an H-IIA rocket in summer 2008 by the Japan Aerospace Exploration Agency (JAXA).

One of the spacecraft’s significant experiments will rely on an emerging technology for its memory. That emerging technology is magnetic random access memory (MRAM), which combines magnetic materials and silicon integrated circuitry to form a fast, reliable, non-volatile RAM (NVRAM).

Sprites (also called “red sprites”) occur above thunderstorms prior to the familiar lightning discharges seen in the middle and lower atmosphere. Unlike those more familiar discharges, sprites (along with related phenomena called blue flashes and jets) move upward from the thunderstorm tops toward the stratosphere instead of downward toward the ground.

Capable of mounting a long-term observation program, SpriteSat will carry a magnetometer subsystem dubbed Tohoku-AAC MEMS Unit (TAMU). TAMU will provide SpriteSat with magnetometer data of the Earth’s magnetic field to correlate with its sprite observations.

Built by Ångström Aerospace Corp. (ÅAC) of Uppsala, Sweden, TAMU will record its observations in an extended temperature range 4 Mb MRAM from Freescale Semiconductor in Orlando, FL. Ångström selected Freescale’s device because it combines non-volatile memory with extended temperature operation, unlimited endurance, and long-term data retention, even when the power fails.

“Freescale’s 4 Mb MRAM device replaces both flash and battery-backed SRAM in Angstrom’s module for the SpriteSat,” said Dr. Johan Akerman, head of the Applied Spintronics Group at Sweden’s The Royal Institute of Technology in Kista, who helped design and build the electronics package. “The ability to reconfigure critical programs and route definitions during various stages of a satellite mission is a significant benefit.”

The MRAM stores program data and FPGA configuration data on a single memory, allowing Angstrom Aerospace to reduce all storage requirements to one chip, reducing board area. At the same time, the flexibility of MRAM storage allows the system to be reconfigured in space.

MRAM uses magnetic materials combined with conventional silicon circuitry to deliver the speed of SRAM with the non-volatility of flash in a single, unlimited-endurance device. MRAM devices combine the best features of non-volatile memory and RAM to enable “instant-on” capability and power loss protection in new classes of intelligent electronic devices. MRAM devices are used in a variety of applications, such as networking, security, data storage, gaming and printers. The extended temperature version is suitable for use in rugged application environments, such as military, aerospace and automotive designs.

Freescale introduced the MR2A16A 4 Mb device in 2006 as the world’s first commercially available MRAM for customers looking for an alternative that could replace flash, SRAM and EEPROM with a single chip and eliminate battery-backup for SRAM. Since then, the product has garnered several awards from many trade publications serving the embedded and industrial sectors.

www.freescale.com

www.aaerospace.com





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me