It's 'sluggish,' but manufacturing's global recovery moves forward

Recent data paint an unmistakable picture that a global economic recovery is in progress. Yet it does so with a caveat that the rebound could be unusually sluggish and disproportionately catalyzed by a number of select emerging market nations, notably China, India and Brazil, which were less affected than the industrialized countries by the global financial crisis, according to a new report.

11/01/2009


Recent data paint an unmistakable picture that a global economic recovery is in progress. Yet it does so with a caveat that the rebound could be unusually sluggish and disproportionately catalyzed by a number of select emerging market nations, notably China, India and Brazil, which were less affected than the industrialized countries by the global financial crisis, according to a new report.

In the MAPI Quarterly Forecast of U.S. Exports, Global Growth, and the Dollar: Fourth Quarter 2009 Through Fourth Quarter 2011, economist Cliff Waldman writes that “signs of normalization continue to appear in the financial and economic environments,” and that the foundations for a renewed period of global growth are increasingly evident as the world pivots from crisis to at least some semblance of stability.

“Unfortunately, stability does not necessarily presage strength,” Waldman cautioned. “Two factors in particular are likely to slow the pace of the recovery during the next few years. First, the timing and impact of the withdrawal of historically accommodative monetary and fiscal policies is a tricky issue, as near-zero interest rate policies are unsustainable. Second, it would appear that the U.S. consumer has been financially shocked into a higher savings rate, a positive development for long-run global stability, but one that saps a key source of U.S. and global strength just when it is needed to help pull the world economy out of an especially difficult period.”

A falling dollar and only modest global growth tempers MAPI's exports forecast. MAPI anticipates the growth rate of total U.S. exports of goods and services will contract by 11.8% in 2009. This will be followed by 5.7% growth in 2010, with acceleration to 7.9% in 2011, a rebound tepid by the standards of recoveries from deep export contractions in the post-World War II period.

Most advanced economies are expected to experience marginal recoveries in gross domestic product (GDP) and in manufacturing output over the next two years. GDP in non-U.S. industrialized countries, which include Canada, the Eurozone (plus Denmark, the United Kingdom and Sweden) and Japan, is expected to rise incrementally from 1.9% growth during the first quarter of 2010 to an average of 2.6% growth in the second half of 2011.

Developing countries, as has been the case in recent decades, will likely grow at a faster pace. Aggregate developing country GDP is expected to increase by 3.5% during the first quarter of 2010, and then gradually reach a high of 5% growth during the third quarter of 2011 before moderating to 4.5% growth by the end of 2011.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me