ISM Report: PMI hovers below break-even again in August

Institute for Supply Management index remains just under 50 mark for third straight month.

09/07/2012


Institute of Supply Management logo. Courtesy: ISMManufacturing sector activity in August remained barely below the break-even line for the third consecutive month, according to the Institute of Supply Management’s monthly PMI Report.

The PMI registered 49.6%, a decrease of 0.2 percentage point from July's reading of 49.8%, indicating contraction in the manufacturing sector for the third consecutive month. This is also the lowest reading for the PMI since July 2009. The New Orders Index registered 47.1%, a decrease of 0.9 percentage point from July, indicating contraction in new orders for the third consecutive month.

The Production Index registered 47.2%, a decrease of 4.1 percentage points and indicating contraction in production for the first time since May 2009. The Employment Index remained in growth territory at 51.6%, but registered its lowest reading since November 2009 when the Employment Index registered 51%. The Prices Index increased 14.5 percentage points from its July reading to 54%. Comments from the panel generally reflect a slowdown in orders and demand, with continuing concern over the uncertain state of global economies.

"Internal indicators and feedback from sales channels are indicating a slowdown in manufacturing contracted in August as the PMI registered 49.6%, a decrease of 0.2 percentage point when compared to July's reading of 49.8%. A reading above 50% indicates that the manufacturing economy is generally expanding; below 50% indicates that it is generally contracting.

A PMI in excess of 42.6%, over a period of time, generally indicates an expansion of the overall economy. Tthe August PMI indicates growth for the 39th consecutive month in the overall economy, but indicates contraction in the manufacturing sector for the third time since July 2009, when the PMI registered 49.2%.

The past relationship between the PMI and the overall economy indicates that the average PMI for January through August (52.2%) corresponds to a 3.2% increase in real gross domestic product. In addition, if the PMI for August (49.6%) is annualized, it corresponds to a 2.4% increase in real GDP annually.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me