Is there such a thing as borderline sexual harassment?

When Millie Cochran, a clerical employee in the maintenance department, irately charged Assistant Supervisor Gerard Anker with sexual harassment, an investigation was launched.

05/01/1998


When Millie Cochran, a clerical employee in the maintenance department, irately charged Assistant Supervisor Gerard Anker with sexual harassment, an investigation was launched.

The probe revealed that Cochran had dated Anker on one occasion, after which she decided she wanted nothing more to do with him. This decision apparently conflicted with Anker's plans and desires. She claimed that one time in the stock room, he grabbed her from behind and started to fondle her. Another time he kissed her, declared they were meant for each other, and tried to persuade her to go to a motel with him. Both times, Cochran made it clear that his advances were unwelcome, the last time with a sharp slap on his face.

Following the investigation, Anker received an official reprimand and was transferred to another department.

This action didn't satisfy Cochran. "Transfer is no punishment at all," she said. "Sexual harassment is clear grounds for dismissal."

"That's management's decision to make," Maintenance Supervisor Al Fowler replied.

"That's all you're going to do about it? In that case, I'm planning to sue."

Question : If Cochran follows through with her threat, do you think she will win?

Kramer's decision: "Anker's transfer and reprimand are adequate response in this case," Plant Engineer Ted Kramer ruled. "For sexual harassment to constitute grounds for dismissal, it must be sufficiently frequent and severe as to alter working conditions unfavorably, create a hostile work environment, adversely affect the employee's work performance, or otherwise cause her harm or injury. While I will agree that Anker's action is reprehensible, I think the harassment falls short of that in this case."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me