Is rejecting a senior's training request justified?

Due to the diversity and sophistication of lab and plant instruments, filling the role of Instrument Repairman Class I was quite a difficult task. So when openings in the training program for IR-1 instruction occurred, only four workers applied.

10/01/1999


Due to the diversity and sophistication of lab and plant instruments, filling the role of Instrument Repairman Class I was quite a difficult task. So when openings in the training program for IR-1 instruction occurred, only four workers applied.

By far the most experienced applicant was Instrument Repairman Class II Grant Kramer. Kramer, 63, was a 14-yr veteran of the maintenance department and had held the Class II job for 9 yr. From that standpoint, he was well qualified for advanced training and promotion to Class I status. So when rejected for training, he was shocked.

"I don't dispute your ability or experience," Maintenance Foreman Chuck Alboum told Kramer. "I'm turning you down because of your age. That training program is expensive. So is the transition period required for the shift from Class II to Class I. By the time you're set in the new job, you'll be ready for retirement. You know 65 is mandatory retirement here."

Alboum's explanation did not sit well with Kramer. "I deserve a crack at that job. Unless I get it, I'm going to file for age discrimination."

Alboum shrugged. "That's your privilege, but you'll be wasting your time."

Question: Does Kramer have a case? Should he be enrolled in the training?

Marshall's decision: "No way," Plant Engineer Lewis Marshall ruled when informed of Kramer's threat. "An employer is entitled to fair return on its training investment. The instruction itself runs 3 mo. Even if he did well, it would be a year until he becomes fully qualified. By then, he'd be about ready for retirement under the age 65 retirement policy. This isn't age discrimination. It's common sense and good business."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me