Industrial AP/VPN/router with 3.5G cellular support
Aaxeon Technologies' Industrial AP/VPN/Router with 3.5G Cellular support has two 10/100TX ports and can operate in three routing modes, including modem dial-up.
Aaxeon Technologies AP/VPN/Router with 3.5G Cellular support is said to be a reliable 802.11b/g WLAN Access Point/Router with two 10/100TX ports. It can be configured to operate in three modes of routing functions: Dynamic/Static IP route, PPPoE authentication, and Modem (56K/GPRS/3G/3.5G Modem) dial-up. In Modem dial-up mode, it supports traditional 56K modem and GPRS/3G/3.5G Modem via USB interface. In addition, the APR-2000 also provides a PD feature on ETH2 to comply with IEEE802.3af P.O.E PD specifications. It also features dual redundant Ethernet ports (recovery time & 10ms), various encryption protection (WEP/WPA/WPA-PSK/WPA2/WPA2-PSK/Radius), VPN setting support, NAT setting support, and much more. The APR-2000 is one of the best solutions for wireless communication applications.
High speed air connectivity: WLAN interface supports up to 54 Mbps link speed;
High security capability;
WEP / WPA / WPA-PSK (TKIP, AES) / WPA2 / WPA2-PSK (TKIP, AES) / 802.1x / RADIUS supported;
Various kinds of WAN Connection types supported: Dynamic/Static IP, PPPoE, Modem/3G;
Dual redundant Ethernet port (Recovery time & 10ms);
Switch mode support: Daisy chain support to reduce usage of switch ports;
Wireless connection status monitoring;
Event warning by syslog, email, SNMP trap, relay, and beeper;
IP table to prevent access from unauthorized IP address;
Supports VPN Setting (Open VPN , PPTP VPN);
Supports NAT Setting (Virtual Server, Port Trigger, DMZ, UPnP);
Dual redundant DC power inputs of terminal block;
Rigid IP-30 housing design;
DIN-Rail and panel mountable; and
Wide operating temperature: -35° C to 75° C (-31° F to 167° F).
- Edited by Mark T. Hoske , editor in chief
Control Engineering New Products eNewsletter
Register here to select your choice of free eNewsletters .
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey