In a slump? Manufacturers’ practice report shows not all are hitting the panic button

It’s easy to assume that when the economy is in a recession, businesses will make major cutbacks to survive. But according to the American Society for Quality’s latest Quarterly Quality Report, many manufacturing companies are not in the crisis mode one would expect.

01/26/2009



It’s easy to assume that when the economy is in a recession, businesses will make major cutbacks to survive. However, according to the American Society for Quality’s ( ASQ ) latest Quarterly Quality Report , many manufacturing companies are not in the crisis mode one would expect.

Two pictures
ASQ talked with its members to gain insight on the issue from practicing quality professionals. The feedback received clearly shows some of the expected pain companies are going through—such as reductions in workforce and training, and budgetary cutbacks for quality initiatives.

However, not all share that view. The results displayed two very different types of organizations reacting in fundamentally different ways to eroding economic conditions. On the one hand there are those going into crisis mode, cutting back and de-emphasizing quality initiatives. On the other hand, there are those that continue to invest in quality and innovation as a competitive advantage in the face of economic uncertainty.

It’s a business dilemma that affects many other functions besides quality: To cut back or to forge ahead when the going gets tough? Organizations that refuse to panic, that move ahead with new initiatives, and that don’t cut too deeply will be better positioned to excel when the economy rebounds.

“The really good news—if there is a silver lining in these times—is while some companies are shrinking back into their shell, other organizations are moving decidedly in a forward-looking direction, and keeping quality practices at the top of the list,” says Ken Case, ASQ past president and emeritus professor at Oklahoma State University.

Some still cutting
Those members who believe their organization’s viability is different today than a year ago and attributed it to the deteriorating economy were the ones who were much more likely to report reductions in workforce, less training, and overall culture changes when it comes to business improvement where they work. Many were even backing away from quality initiatives that organizations typically use to cut costs.

Balancing efficiency with innovation

In between the two obvious extremes is the middle ground of organizations that are attempting to balance efficiency with innovation and growth. ASQ members said waste reduction and increased efficiency are receiving a considerable amount of increased attention. Also garnering more attention are efforts to generate inspiration and new ideas. Members said they are listening to the voice of the customer more and are more engaged in programs to bolster innovation and creativity. Innovation, creativity, and quality initiatives are key for organizations looking for continued growth.

Overall, many members felt their companies and the management at their companies were looking forward and using quality for long-term strategies. The results presented are an indication of what many manufacturers may also be experiencing.

The full quality report can be read here .







No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me