IMTS 2012: Integrated motion of robotics, CNC

Siemens demonstrates Kuka Robotics integration for workpiece handling at IMTS 2012. Motion is controlled by Kuka mxAutomation software through the Siemens Sinumerik CNC, easing integration and operations.

09/10/2012



Siemens demonstrates Kuka Robotics integration for workpiece handling at IMTS 2012. Motion is controlled by Kuka mxAutomation software through the Siemens Sinumerik CNC, easing integration and operations. Courtesy: SiemensSiemens and Kuka Robotics have collaborated to integrate robotic workpiece handling with computer numerical control (CNC). At the International Manufacturing Technology Show (IMTS 2012) in Chicago (Siemens booth E-5010), a Kuka robot is articulating parts, simulating the operation on a CNC machine tool. Key to this development is the machine builder’s ability to integrate Kuka mxAutomation software through the Siemens Sinumerik CNC platform, allowing the machine operator to run the machine tool and robot from one control panel. 

The robot’s motion sequence is engineered within the Siemens Sinumerik 840D sl CNC, then transferred by the 840D sl’s programmable logic controller (PLC) function to the mxAutomation interpreter on the Kuka Robotics KR C4 robot controller. All program changes to a six-axis robot can easily be input on a second channel of the CNC and fully operated. The integration allows the machine tool’s automation sequence to run more efficiently, and perform changes on-the-fly to minimize machine downtime, without special knowledge of robot programming language. During the operation of the machine tool, all changes made can be visualized on the CNC screen, minimizing operator actions.

Siemens said it is the first CNC supplier to show this capability for single-screen operation of the machine tool and robotic materials handling on the CNC.

IMTS 2012At IMTS 2012, Siemens Sinumerik 840D sl CNC is programmed to allow the operator to jog the robot, command the gripper, otherwise simulate integrated actions with a machine tool. 

In operation, the KRC4 integrator and mxAutomation convert the robot language into the same commands used for multi-axis machine tool functions. One Profinet cable runs between the robot and the CNC. 

According to Kuka’s Andreas Schuhbauer, key technology manager for machine tool automation (Augsburg, Germany), “mxAutomation allows the machine tool builder a single I/O language for integrating robotics on the CNC, while the end user operator can run both the machine tool and the robot from a single screen on the control.” 

The mxAutomation software for Sinumerik CNC was joint developed by Kuka and Siemens. Kuka created plug-in function modules for the Siemens Step 7 PLC engineering software and provided its robot knowledge to Siemens for creation of the second channel logic on the CNC, Andreas Schuhbauer said. 

All safety functions and test functions for load / unload, brake test, gripper, robot communication and safe operation of the robot are provided with Profinet and Profisafe communications. 

Future developments for mxAutomation are planned, including a wider application range for robots in the CNC machine tool environment.

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, and Plant Engineering, mhoske@cfemedia.com.

Global Automation and Manufacturing Summit at IANA, IMTS 2012

 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me